Sony STR-DH810 ユーザーズマニュアル

 

 

 

 

 

 

 

You can adjust the level of each speaker. 
These settings are applied to all sound fields.

x TEST TONE

Lets you adjust the speaker levels while 
listening to the test tone from your listening 
position. 
• OFF

The test tone is turned off.

• AUTO xxx

* 

The test tone is output from each speaker in 
sequence.
* xxx

 represent a speaker channel.

You can adjust each speaker’s level using the 
following parameters.
For front left/right speakers, you can adjust the 
level from –10.0 dB to +10.0 dB in 0.5 dB 
steps. For other speakers, you can adjust the 
level from –20.0 dB to +10.0 dB in 0.5 dB 
steps. 

x FL LEVEL

x FR LEVEL

x CNT LEVEL 

x SL LEVEL 

x SR LEVEL

x SB LEVEL

x SBL LEVEL

x SBR LEVEL

x LH LEVEL

x RH LEVEL

x SW LEVEL

Depending on the speaker pattern setting, some 
parameters may not be available.

x D. RANGE

Lets you compress the dynamic range of the 
soundtrack. This may be useful when you want 
to watch movies at low volumes late at night. 
Dynamic range compression is possible with 
Dolby Digital sources only.
• COMP.  MAX

The dynamic range is compressed 
dramatically.

• COMP.  STD

The dynamic range is compressed as 
intended by the recording engineer.

• COMP.  AUTO

The dynamic range is compressed 
automatically.

• COMP. OFF

The dynamic range is not compressed.

Dynamic range compressor lets you compress the 
dynamic range of the soundtrack based on the 
dynamic range information included in the Dolby 
Digital signal. 
“COMP. STD” is the standard setting, but it only 
enacts light compression. Therefore, we recommend 
using the “COMP. MAX” setting. This greatly 
compresses the dynamic range and lets you view 
movies late at night at low volumes. Unlike analog 
limiters, the levels are predetermined and provide a 
very natural compression.