Sony VPL-CX20 ユーザーズマニュアル

12

Projecting

The projection size that can be adjusted 
with the automatic focus adjustment is 
from 40-inch up to 150-inch. However, it 
may not be perfectly adjusted depending 
on the brightness of the room, or the state 
of the screen. In this case, adjust it 
manually in step 8 on page 13.

Turn on the equipment connected to 
the projector.

Press the INPUT key to select the 
input source.

Each time you press the key, the input 
signal switches as follows:

Smart APA (Auto Pixel Alignment) 
adjusts the picture of the connected 
equipment so that it is projected clearly.

• If “Auto Input Search” is set to “On,” the 

projector searches for the signals from 
the connected equipment and displays 
the input channel where the input signals 
are found.

• The Smart APA feature is effective for 

the input signal from a computer only.

Switch the equipment connected to 
output to the projector.

Depending on the type of your 
computer, for example a notebook, or an 
all-in-one LCD type, you may have to 
switch the computer to output to the 
projector by pressing certain keys (e.g., 

, etc.), or by 

changing your computer’s settings.

The key used for switching the computer to 
output to the projector varies depending on 
the type of computer.

Adjust the upper or lower position of 
the picture.

To adjust using the Remote 
Commander
Press the TILT/KEYSTONE key on the 
Remote Commander to display the Tilt 
menu and adjust the tilt using the v/V/
b/B keys.
To adjust using the control panel on 
the left side of the projector
Press v or V of the TILT key to adjust 
the tilt of the projector.

Computer connected to 
the INPUT A connector

Input-A

Video equipment 
connected to the 
AUDIO/VIDEO input 
connector

Video

Video equipment 
connected to the 
AUDIO/S-Video input 
connector

S-Video

Input-A 

t Video t S-Video

or

and