Nokia 3310, 3330, 3410 サービスマニュアル

 

 

PAGE 12 (21) 

Approved 2.0 

Nokia Mobile Phones Customer Care E&A 

SQX 00451-en MWy 

Technical Services, Repair Concepts 

Confidential 

27.05.2002 

 

In this section you will get some general hints how to carry out repairs:

  

o Before starting the repair you must take care of ESD precautions like being in your ESD-area and 

connecting your wristband. 

o Use gloves to avoid corrosion and fingerprints. 
o Protect windows and displays with a foil to avoid dust and scratches. 
o When cleaning the pads you have to use a soft cloth and isopropanol. It is not allowed to use a 

glass fiber pencil because it scratches the surface and will lead later on to corrosion. 

o Mechanical parts, which didn’t repair the failure, can be reused, if they are not soldered. 
o Use always original Nokia parts or accessories. 
o Meet the torque requirements when assembling the unit (see also the document “torques for 

transceiver assembly” on Partner Websites). 

o Always use your own equipment for testing where you are sure that it works. E.g. if the customer 

complains about charger function, please test the phone with your own charger to be sure if 
phone or charger causes the malfunction. 

 
Following General Service Bulletins have to be followed: 

SB-055: 

Common notice for good ventilation 

SB-089: 

Don’t try to repair prototypes (indicated on Typelabel). 

 

SB-107: 

Be sure that you have minimum hardware requirements in place.

 

SB-115: 

Handling of liquid damages. 

SB-121: 

If one of your service tools cause malfunction, return the defective part.

 

SB-124 

Service Policy for packaging serviced products 

SB-131: 

Check these guidelines when refurbishing products.

 

SB-132: 

You need a 

Golden Phone for inspecting your measuring equipment.

 

 
Legend for Quick Trouble Shooter: 
This legend is valid for all parts of the 

Quick Trouble Shooter 

Follow the steps until the problem is solved. If this doesn’t help, you are not authorized 
to go forward. Only underlined components ( e.g

. I007) can be changed. 

  Follow the arrows step by step 

 

Pads or contacts: Check optical and mechanical condition as well as corrosion. 
Clean if necessary. 

 

Measure component for electrical functionality and change, if needed. 

 

No more action possible, send product to the 
appropriate service partner with higher service level. 

4, 5 

Superscript numbers are for additional comments or instructions 

 

Service Manual 3310/3330/3410 Level 1 

Copyright 2002 © Nokia Corporation