Panasonic AG-MX70 ユーザーズマニュアル

In the key learn editing mode, the key frame number is displayed in [K Frame].
Using the rotary 1 control, the editing items are selected and key frames are set.  Key frames 00 to 19 can be set, and they
are displayed during editing in the rotary 2 control display area.
The time settings for the key frames to date can be set by [ME Time].  This is useful for an additional [KeyFrame].  During
learning, ME is automatically selected for time.

Editing items that can be selected by the rotary 1 control

Insert:

A key frame is inserted in the space of the next key frame.  Insert is executed using [Enter].

Replace: The current key frame is replaced.  Replace is executed using [Enter].
CLR KF: The current key frame is cleared.  Clear is executed using [Enter].
Copy:

The current key frame is copied.  Copy is executed using [Enter].

Paste:

The key frame in the copy buffer is pasted by overwriting.  Paste is executed using [Enter].  If the key frame has
not been copied, the execution menu cannot be selected.

Exit:

Key learn is stored in the memory after exiting the editing mode.  Exit is executed using [Enter].

In the editing mode, it is possible to set the parameters using the rotary 2, 3, 4 and 5 controls, XYZ using the joystick XY and
rotary Z control, the aspect ratio using [Aspect], the key frames using [Shift] + rotary 2 control, and the key level using [Shift]
+ rotary 5 control.
To set another key pattern, first exit this screen, proceed with key pattern input again, and execute key learn.

R2: [Rotate] rotation setting
R4: [Time] setting
R5: [TransF] (transformation) setting
XY Position
3D parameters are the same as with 3DModify.