Panasonic cq-dfx802n ユーザーズマニュアル

51

Cautions:
¡Check the connectors provided on your car (see precaution below) before connect-

ing the system.

¡This unit is designed for use in a car having a 12-volt negative ground battery sys-

tem.

¡To prevent damage to the unit, be sure to follow the connection diagram.
¡Strip about 5 mm of the lead ends for connection (only non-ISO connector cords).
¡Do not insert the power connector into the unit until the wiring is completed.
¡Be sure to insulate any exposed wires to prevent short circuiting with the car chas-

sis.  Bundle all cables, and prevent cable terminals from touching any metal parts.

ACC

BATTERY 15A

A5 : Motor Antenna Relay Control Lead 
(Blue)
To Motor Antenna (Max. 500mA).
This lead is not intended for use with a switch
actuated power antenna.
Note: The power antenna extends automati-
cally when the power of this unit is turned on.

C1 : External Mute Lead (Orange)
To the Navi Mute lead of the Panasonic car navi-
gation system or car telephone mute lead.

C2 : Dual CD Changer Control Lead (Brown
w/white stripe)

C3 : External Remote Control Lead (Brown
w/black stripe)
When using a non-Panasonic external remote
control, refer to the manufacture for their product
before connecting.

C4 : External Amplifier Control Power Lead
(Blue w/white stripe)
To an external amplifier.

(Orange)

ISO Connector A (Black)

ISO Connector B (Brown)

(Brown w/white stripe)

A8 (Black)

A7 (Red)

A4 (Yellow)

Fuse 15 A

Resistor (1 k

Ω)

A5 (Blue)

B8 (Green w/black stripe)

B7 (Green)

B6 (White w/black stripe)

B5 (White )

B4 (Gray w/black stripe)

B3 (Gray)

B2 (Violet w/black stripe)

B1 (Violet )

(Brown w/black stripe)

(Blue w/white stripe)

A7 : Power Lead (ACC or IGN) (Red)
To ACC power, +12 V DC.

A8 : Ground Lead (Black)
To a clean, bare metallic part of the car chassis.

A4 : Battery Lead (Yellow)
To the car battery, continuous +12 V DC.

(Not used)