Panasonic cq-df802w ユーザーズマニュアル

ページ / 9
E
N
G
L
I
S
H
42
CQ-DF802W
57
E
N
G
L
I
S
H
41
CQ-DF802W
56
Electrical Connections 
(Continued)
❐ Upgrading the System
Example Combination
CD changer (CX-DP88, option)
Stereo power amplifier
Note:
For wiring, carefully read the operating instructions for the devices connected.
CQ-DF802W
CD changer control 
connector
R (Red)
L (White)
Stereo power 
amplifier
Subwoofer speakers
CD.C-IN
R (Red)
L (White)
S.W-OUT
DIN cord
BATTERY
Fuse (3 A)
Extension cord
(included for CX-DP88)
CD changer
CX-DP88
Ground lead
Battery lead
Power connector
Specifications
❐ General
Power supply:
12 V DC (10.8 Vj16 V), test voltage 14.4 V, negative ground
Current consumption:
Less than 2.2 A (CD play mode; 0.5 Wa4 channels)
Maximum power output:
50 Wa4 channels at 1 kHz, volume control maximum
Tone adjustment range:
Bass:
n
12 dB at 120 Hz
Treble:
n
12 dB at 10 kHz
Suitable speaker impedance: 4j8 ≠
Preamp output voltage:
5.0 V (CD play mode; 1 kHz, 0 dB)
Subwoofer output voltage:
5.0 V
Preamp output impedance:
60 ≠
Subwoofer output impedance: 60 ≠
Dimensions (WaHaD):
178a50a155 mm
Weight:
1.7 kg
❐ FM Stereo Radio
Frequency range:
87.50 MHzj108.00 MHz
Usable sensitivity:
12.0 dBf. (75 ≠)
50 dB quieting sensitivity:
15.0 dBf. (75 ≠)
Alternate channel selectivity: 75 dB
Stereo separation:
35 dB (1 kHz)
Image response ratio:
75 dB
IF response ratio:
100 dB 
Signal/noise ratio:
60 dB
❐ AM Radio
Frequency range:
531 kHzj1 602 kHz
Usable sensitivity:
29 dB/¨V (25 ¨V, S/N 20 dB)
❐ CD Player
Sampling frequency:
8 times oversampling
DA converter:
MASH·1 bit/4 DAC system
Error correction system:
Panasonic super decoding algorithm
Pick-up type:
Astigma 3-beam
Light source:
Semiconductor laser
Wave length:
780 nm
Frequency response:
20 Hzj20 kHz (n1 dB)
Signal/noise ratio:
95 dB
Total harmonic distortion:
0.02 % (1 kHz)
Wow and flutter:
Below measurable limits
Channel separation:
90 dB
Note:
Specifications and the design are subject to modification without notice due to improvements in technology.