Panasonic dmr-e75veb ユーザーズマニュアル

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed.

∫ To release the unit from recording standby

The unit turns on and “

” goes out.

≥Be sure to press [

, TIMER] before the programme start time to 

put the unit on recording standby. Timer recording will work only if 

“

” is displayed.

∫ To cancel recording when recording has already 

≥You can also press and hold [∫] on the VHS main unit for more 

than 3 seconds to stop recording.

∫ PDC Function

 (

l 68)

If a TV programme starts earlier or later from original schedule, 
recording start and stop can synchronize with the actual 
broadcasting.
Conditions for correct operation of the PDC function:
≥The TV station must broadcast PDC signals.
≥The programme starting time must be set correctly to the starting 

time listed in the newspaper/magazine.

3, 4] to select “ON”.

Note
≥“

” flashes for about 5 seconds when the unit cannot go to timer 

recording standby (e.g., video cassette with no prevention tab or no 
video casette in the cassette compartment).

During a timer recording performed in SP mode, this function 
automatically changes the tape speed if the unit determines that the 
remaining tape is insufficient to record the entire programme. If the 
remaining tape time is still not sufficient even in LP mode, the 
programme cannot be recorded to the end.

≥This function cannot change the recording speed to the EP mode 

for PAL system.

≥This function may not work correctly when you record programmes 

in NTSC system.

≥The tape length must be set correctly. (

l 60)

≥Some tapes may not work correctly.
≥If the tape speed changes during a timer recording, some brief 

picture distortion occurs at the point.

[1]

[2]

3, 4] to select the programme.

[3]

¢, CANCEL/RESET] to delete,

≥You cannot change or delete programmes that are currently 

recording.

≥The timer recording setting screen appears.
≥To continue deleting programmes steps 2–3.

[4]

3, 4, 2, 1] to change and press 

≥To continue changing programmes steps 2–4.

[5]

≥“

” lights on the unit’s display.

[6]

≥If the timer recording is started with keeping the unit turned on, 

the unit is not turned off automatically even after the timer 
recording is completed.

For your reference
≥Programmes that failed to record are not deleted, but deleted from 

the list at 4 a.m. the day after tomorrow automatically.

EB.book  59 ページ  ２００４年４月１３日　火曜日　午前９時７分