Panasonic gph5d ユーザーズマニュアル

 

86

 
Equipment required: HDTV Component Video Gray scale pattern Generator, PC 
Video Gray Scale Generator 
Panel Settings; Picture = Normal, White Balance = Cool, Aspect Ratio = 16:9 

Pattern Display:  

 

Figure 72 

Step 1- Access the R, G and B cutoff settings and set them to “80”. 
Step 2- Under the Chroma Control setting, Set Gun off to "5" (Only green 
pixels emitting). 
Step 3- Access the RGB Sub Adjust, G Sub Bright setting and adjust G 
Sub bright so that green pixel emission starts at black 2% area and no 
emission occurs in the black 0% area. 
Step 4- Under the Chroma Control setting, Set Gun off to "3". (Only blue 
pixels emitting.) 
Step 5- Access the RGB Sub Adjust, B Sub Bright setting and adjust B 
Sub bright so that blue pixel emission starts at black 2% area and no 
emission occurs in the black 0% area. 
Step 6- Under the Chroma Control setting, Set Gun off to "6". (Only red 
pixels emitting.) 
Step 7- Access the RGB Sub Adjust, R Sub Bright setting and adjust R 
Sub bright so that Red pixel emission starts at black 2% area and no 
emission occurs in the black 0% area. 
Step 8- Change input to PC / RGB signal. Repeat procedure (1 to 7) using 
PC input signal.