Panasonic kx-mb263hx ユーザーズマニュアル
7. Fax (KX-MB773/KX-MB783 only)
49
7.7 Receiving a fax manually –
Auto answer OFF
Auto answer OFF
7.7.1 Activating TEL mode
1
Make sure feature #404 is set to “
TEL” beforehand
2
Press {FAX AUTO ANSWER} repeatedly to display
“
“
TEL MODE”.
L
The {FAX AUTO ANSWER} light turns OFF.
Note:
L
If you do not answer the call within 10 rings, the unit
will temporarily switch to fax reception. The other
party can then send a fax.
will temporarily switch to fax reception. The other
party can then send a fax.
How to receive phone calls and faxes with the
handset unit
handset unit
1. Lift the handset to answer the call.
2. When:
–
document reception is required,
–
a fax calling tone (slow beep) is heard, or
–
no sound is heard,
press {START}.
3. Replace the handset.
Note:
L
To stop receiving, see page 69.
How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset
of the extension telephone.
2. When:
–
document reception is required,
–
a fax calling tone (slow beep) is heard, or
–
no sound is heard,
press {*} {#} {9} (default fax activation code)
firmly.
firmly.
3. Replace the handset.
Note:
L
To stop receiving, see page 69.
L
To receive fax documents using the extension
telephone, make sure remote fax activation is turned
ON (feature #434 on page 61) beforehand. The
default setting is ON.
telephone, make sure remote fax activation is turned
ON (feature #434 on page 61) beforehand. The
default setting is ON.
7.7.2 Activating TEL/FAX mode
1
Make sure feature #404 is set to “
TEL/FAX”
beforehand (page 59).
2
Press {FAX AUTO ANSWER} repeatedly to display
“
“
TEL/FAX MODE”.
L
The {FAX AUTO ANSWER} light turns OFF.
3
The ringer volume setting should be ON (page 25).
How phone calls and faxes are received
1. “
INCOMING CALL” will be displayed but the unit will
not ring.
2. The unit will wait for the duration of 2 rings before
answering the call.
L
L
During this time, an extension telephone will ring.
3. The unit will answer the call and try to detect a fax
calling tone.
When a fax calling tone is detected
The unit receives the fax automatically without
ringing.
When a fax calling tone is not detected
A The unit will ring 3 times. You may answer the call.
When a fax calling tone is detected
The unit receives the fax automatically without
ringing.
When a fax calling tone is not detected
A The unit will ring 3 times. You may answer the call.
{
START}
{
STOP}
MB263HX_773_783EX-PFQX2807ZC-OI-en.book Page 49 Monday, August 6, 2007 11:42 AM