Panasonic kx-tg8220fx ユーザーズマニュアル
Useful Information
49
I cannot make or
receive calls.
receive calls.
L
The base unit AC adaptor or telephone line cord is not
connected. Check the connections.
connected. Check the connections.
L
If you are using a splitter to connect the unit, remove
the splitter and connect the unit to the wall socket
directly. If the unit operates properly, check the splitter.
the splitter and connect the unit to the wall socket
directly. If the unit operates properly, check the splitter.
L
Disconnect the base unit from the telephone line and
connect the line to a known working telephone. If the
working telephone operates properly, contact our
service personnel to have the unit repaired. If the
working telephone does not operate properly, contact
your service provider/telephone company.
connect the line to a known working telephone. If the
working telephone operates properly, contact our
service personnel to have the unit repaired. If the
working telephone does not operate properly, contact
your service provider/telephone company.
L
The dialling mode setting is incorrect. Set to “Tone” or
“Pulse” as needed (page 13).
“Pulse” as needed (page 13).
L
You dialled a call restricted number (page 26).
L
The key lock feature is turned on. Turn it off (page 17).
The unit does not ring.
L
L
The night mode feature is turned on. Turn it off (page
23).
23).
The batteries should
be charging but the
battery icon does not
change.
be charging but the
battery icon does not
change.
L
Clean the charge contacts and charge again (page
12).
12).
A busy tone is heard
when {C} is pressed.
when {C} is pressed.
L
The handset is too far from the base unit. Move closer
and try again.
and try again.
L
Another handset is in use or the answering system is
being used. Wait and try again later.
being used. Wait and try again later.
Static is heard, sound
cuts in and out.
Interference from other
electrical units.
cuts in and out.
Interference from other
electrical units.
L
Place the handset and the base unit away from other
electrical appliances.
electrical appliances.
L
Move closer to the base unit.
L
Your unit is connected to a telephone line with DSL
service (page 52).
service (page 52).
Noise is heard during a
call.
call.
L
You are using the handset or base unit in an area with
high electrical interference. Place the handset and
base unit away from interference sources, such as
antennas and mobile phones.
high electrical interference. Place the handset and
base unit away from interference sources, such as
antennas and mobile phones.
The handset/base unit
stops working while
being used.
stops working while
being used.
L
Disconnect the base unit AC adaptor and turn off the
handset. Connect the base unit AC adaptor, turn on
the handset and try again.
handset. Connect the base unit AC adaptor, turn on
the handset and try again.
The handset beeps
intermittently and/or )
flashes.
intermittently and/or )
flashes.
L
Fully charge the batteries (page 11).
Problem
Cause & solution
TG8200_8220FX(e-e).book Page 49 Monday, August 6, 2007 5:25 PM