HP 457626-001 ユーザーズマニュアル
Contents 65
Figure 49 Removing the PCI cage
Installing PCIe/PCI Riser Board
The system supports up to two riser boards at a time. Use only HP supported expansion boards that
meet the following specifications:
•
Compliance
○
PCI Express x4 or x8
○
PCI-X (available only when the optional PCI-X riser board is installed)
○
HTX (available only when the FL/FH PCIe riser card is not installed)
•
Form Factor
○
Low-profile
○
Full-Height/Full-Length
To remove the HTX riser card:
1.
Loosen the two screws securing the riser card to the PCI cage.
2.
Pull the riser card away from the PCI cage.