Panasonic PT-AE3000E ユーザーズマニュアル
Appendix
Technical Information
52 -
E
NGLISH
J
Communication settings
J
Control commands
Signal level
RS-232C
Character length
8 bits
Sync. method
Asynchronous
Stop bit
1 bit
Baud rate
9 600 bps
X parameter
None
Parity
None
S parameter
None
Command
Control contents
Remarks
PON
POWER ON
In standby mode, all commands other than the PON command are ignored.
The PON command is ignored during lamp ON control.
The PON command is ignored during lamp ON control.
POF
POWER OFF
If a PON command is received while the cooling fan is operating after the lamp has switched
off, the lamp is not turned back on again straight away in order to protect the lamp.
off, the lamp is not turned back on again straight away in order to protect the lamp.
IIS
INPUT
Parameter:
CP1 = COMPONENT1 IN
SVD = S-VIDEO IN
HD1 = HDMI1 IN
HD3 = HDMI3 IN
CP1 = COMPONENT1 IN
SVD = S-VIDEO IN
HD1 = HDMI1 IN
HD3 = HDMI3 IN
CP2 = COMPONENT2 IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
VID = VIDEO IN
HD2 = HDMI2 IN
RG1 = COMPUTER IN
OMN
MAIN
Displaying the main menu.
OEN
ENTER
Activating the selected items in the menu mode.
OBK
RETURN
Returning to the previous menu or escaping from the menu mode.
OCU/OCD/
OCL/OCR
Navigation buttons
OCU = F button
OCD = G button
OCD = G button
OCL = I button
OCR = H button
OCR = H button
OLE
LENS
Activating the LENS CONTROL menu.
OST
DEFAULT
Resetting to the factory default setting. (page 28)
OFZ
FREEZE
Freezing the projected screen.
Parameter:
0 = OFF
Parameter:
0 = OFF
1 = ON
FCI
FUNCTION BUTTON
Activates the function that is assigned to the FUNCTION button of the remote control.
OOT
SLEEP
Setting the duration of time to turn off the power automatically. (See “SLEEP” on page 44.)
0 = OFF
0 = OFF
1 = 60min.
2 = 90min.
3 = 120min.
4 = 150min.
5 = 180min.
6 = 210min.
7 = 240min.
OSH
BLANK
Turning off the projection temporarily.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
Send the command to switch between ON and OFF.
Do not send the command consecutively.
OVM
PICTURE
Activating the PICTURE menu. Send the command to switch menu items. (page 23)
OWM
WAVEFORM
Activating the WAVEFORM.
Parameter:
0 = OFF
1 = FULL SCAN (Y)
2 = FULL SCAN (R)
3 = FULL SCAN (G)
4 = FULL SCAN (B)
Parameter:
0 = OFF
1 = FULL SCAN (Y)
2 = FULL SCAN (R)
3 = FULL SCAN (G)
4 = FULL SCAN (B)
5 = SINGLE LINE SCAN (Y)
6 = SINGLE LINE SCAN (R)
7 = SINGLE LINE SCAN (G)
8 = SINGLE LINE SCAN (B)
6 = SINGLE LINE SCAN (R)
7 = SINGLE LINE SCAN (G)
8 = SINGLE LINE SCAN (B)
VS1
ASPECT
Switching the aspect ratio. (page 24)
VPM
PICTURE MODE
Switching the PICTURE MODE. (page 23)
Parameter:
NOR = NORMAL DYN = DYNAMIC CL1 = COLOUR1 CL2 = COLOUR2
CN1 = CINEMA1 CN2 = CINEMA2 CN3 = CINEMA3
Parameter:
NOR = NORMAL DYN = DYNAMIC CL1 = COLOUR1 CL2 = COLOUR2
CN1 = CINEMA1 CN2 = CINEMA2 CN3 = CINEMA3