Panasonic RX-D29 ユーザーズマニュアル

4

RQTT0627

The unit cannot be powered by batteries if the
AC mains lead is connected.

When the power supply is interrupted, the
current time, timer settings and radio stations
you have set are saved if you have inserted
back-up batteries (not included).
These batteries do not power the unit.

Note

• The included AC mains lead is for use with

this unit only. Do not use it with other
equipment.

• The unit is in the standby condition when the

AC power supply cord is connected.
The primary circuit is always “live” as long as
the power cord is connected to an electrical
outlet.

For areas except for 
United Kingdom, 
Continental Europe,
Australia and 
New Zealand

To household
mains socket

AC mains lead (included)

When to change the batteries
When the battery indicator begins flashing,
replace all 6 of the batteries.

 

It is also a good

idea to replace all the batteries before recording.

Inner row

Outer row

When to change the batteries
The batteries last about a year.
Connect the unit to AC power before replacing
the batteries.

Before connecting or disconnecting the AC
mains lead, press [TAPE/OFF] and stop the tape
to turn the unit off. The memory batteries are
worn out faster if the cord is disconnected with
the power still on.

Open the battery cover and insert your finger in
the hole on the bottom of the unit and push out.

Insert the batteries (not included) observing the correct polarities ( , ).

Operation notes
• Do not place obstacles between the remote control signal sensor and

the remote control unit.

• Do not expose the remote control signal sensor to direct sunlight or to

the bright light of fluorescent light.

• Take care to keep the remote control signal sensor and end of the

remote control unit free from dust.

To prevent damage
• Never place heavy items on it.
• Do not disassemble or reconstruct it.
• Do not spill water or other liquids into it.

Transmission window

About 7 meters in front
of the signal sensor

Remote control
signal sensor

Note

Before playing starts the battery indicator may
flash although the batteries are not drained. It
appears correctly once you start play.

FOR UNITED KINGDOM ONLY
READ THE CAUTION FOR THE AC MAINS
LEAD ON PAGE 3 BEFORE CONNECTION.

Connect the AC mains lead firmly to the unit
and the outlet.

For areas except for United Kingdom,
Continental Europe, Australia and New Zealand
Set the voltage before connection.
Use a flat head screwdriver to turn [VOLT
ADJ] to the voltage setting for your area.
Note that the unit will be seriously damaged
or fail to operate correctly if this setting is
not made correctly.

1

2

(R6, AA, UM-3)

For R14/LR14, C, UM-2

For R6/LR6, AA, UM-3

D29/27-1B_2-4

04.1.30, 13:26

Page 4

Adobe PageMaker 6.5J/PPC