Panasonic SC-AK323 ユーザーズマニュアル

RQT7330

10

Press [:/ J, CD] to start play.
Play starts from the first track of the selected album.
To play from another track, refer to “Track skip play” below.

On the remote control
Press [ g, REW/

3] or [f, 4/FF] to select the desired

On the main unit
Push the joystick left/right ([ g, CURSOR] or [f,
CURSOR]) to select the desired track (                          ).

OR

Press [g/REW/

3] or [f/FF/4] to select the desired

Press [:/ J, CD] to start play.
Play starts from the selected track.
To play from another album, refer to “Album skip play” above.

You can program up to 24 tracks.

Preparation:
1. Press [DISC] and (within 10 seconds) [1]–[5] to select the disc.
2. Press [L, CLEAR].

“PGM” appears.

To select an album directly, press the numbered buttons
after pressing [ALBUM (   or   )].
To select album 10 or over, press [

>10] once then the two digits.

To select album 100 or over, press [

>10] twice then the three digits.

 g

3

f

4/FF] to select the track.

To select a track directly, press the numbered buttons after
pressing [ g, REW/

3] or [f, 4/FF].

To select track 10 or over, press [

>10] once then the two digits.

To select track 100 or over, press [

>10] twice then the three digits.

Repeat steps 2~4 to program other tracks.

Press [ :/J, CD] to start play.

Press [PROGRAM] in the stop mode. (You can replay your program
by pressing [PROGRAM] then [:/J, CD].)

To check program contents
Press [g, REW/

3] or [f, 4/FF].

Every time you press the button:

 

: Album number, track number and program order

are displayed.

AK320   AK323 : Program order is displayed, then album number

and track number.

To add to the program
Do steps 2~4.

To clear the last track
Press [DEL].

To clear all tracks
Press [L, CLEAR].
While “CLEAR ALL” is blinking, press the button again to clear all
tracks.

You can use repeat mode (A page 8) with program play.

You cannot program more than one CD for MP3.

You cannot program CD-DA together with MP3 tracks.

The program memory is cleared when you change a disc or open
the CD tray.

During 1-ALBUM mode, track skipping can only be done within the
current album.

You can find an album by listening to the first track of all albums in the
current disc for 10 seconds each.

Preparation: Press [:/J, CD] and then [L, CLEAR].

INTRO function starts.
(INTRO function is cancelled after playing the first track in the
last album on the current disc.)

While your desired album is playing, press [ :

:

:

:

:/ J, CD].

Play continues from the first track of the album.

To stop during the process, press [INTRO] or [ L, CLEAR].

Current album

Number of tracks
in current album

Current album

Current track