Panasonic sl-s222 ユーザーズマニュアル
Using the Unit with Optional Accessories
Using the unit with an audio
system
system
Using stereo connection cable (not included), you can
hear CDs on your audio system.
hear CDs on your audio system.
≥
Connect the cable to the amplifier after turning off its
power.
power.
≥
Do not connect the cable to the PHONO jacks on the
amplifier.
amplifier.
≥
Obtain the optional connecting cable if the amplifier
comes with mini-phone jacks.
comes with mini-phone jacks.
≥
Adjust the volume on the amplifier.
≥
Keep the unit’s VOLUME control at a setting between
4 and 6.
4 and 6.
Using the unit with a car audio
system
system
Items to be purchased
For connection to the car audio system and the
power supply:
power supply:
≥
Car stereo cassette adaptor (SH-CDM10A)
≥
Car adaptor (SH-CDC9)
Note
!
It may not be possible to use the unit with some types of
car stereos owing to restrictions imposed by the con-
struction of the car stereo cassette adaptor.
car stereos owing to restrictions imposed by the con-
struction of the car stereo cassette adaptor.
For further details, refer to the instructions of the part
concerned.
concerned.
L
R
Connect the car stereo cassette adaptor
to the unit’s headphone jack.
(When doing this, keep the unit’s VOLUME
control at a setting between 4 and 6.)
to the unit’s headphone jack.
(When doing this, keep the unit’s VOLUME
control at a setting between 4 and 6.)
The anti shock function works by reading audio data
and storing it in memory (up to 10 seconds worth). The
unit then fills in interruptions caused by bumps and vi-
brations with data from the memory. This unit also in-
corporates a powerful anti-shock mechanism that
prevents skipping caused when play speed is changed
by swinging of the unit.
and storing it in memory (up to 10 seconds worth). The
unit then fills in interruptions caused by bumps and vi-
brations with data from the memory. This unit also in-
corporates a powerful anti-shock mechanism that
prevents skipping caused when play speed is changed
by swinging of the unit.
Press during play or stop mode.
The following indicator appears on the display.
Note
!
If you have pressed [A.SHOCK] when the unit is in stop
mode, press [
mode, press [
1 ;
] to start play.
When bumps continue repeatedly
The following indicator appears on the display and
sound is interrupted.
sound is interrupted.
To cancel the anti-shock function
Press [A.SHOCK] again.
Note
!
≥
The anti-shock setting can be changed during play,
but this may cause a slight interruption in the sound
because the disc’s rotation speed changes.
but this may cause a slight interruption in the sound
because the disc’s rotation speed changes.
≥
During anti-shock operation, the disc rotates at a high-
er rate than usual to collect extra audio data. This
could result in a slight increase in disc rotation noise.
er rate than usual to collect extra audio data. This
could result in a slight increase in disc rotation noise.
Listening to sound with the unit con-
nected to an audio system
nected to an audio system
The anti-shock function uses digital signal compression
technology. It is recommended that the anti-shock func-
tion be canceled if the unit is connected to a home
audio system.
technology. It is recommended that the anti-shock func-
tion be canceled if the unit is connected to a home
audio system.
Anti-Shock Function
5
If you ship the product
Carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Attach a postage-affixed letter, detailing the complaint, to the outside of the carton.
Attach a postage-affixed letter, detailing the complaint, to the outside of the carton.
Do NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs.
Model
No.
No.
Serial
No.
or
No.
or
Code
No.
No.
Date
of
Purchase
of
Purchase
Dealer’s
Name
Name
Dealer’s
Address
Address
Customer’s Record
I
A.SHOCK
B
A.SHOCK
B
Headphone jack
(
Ë
)
Amplifier
(White)
(Red)
Stereo connection cable (not included)
To CD or AUX
terminals
terminals
RQT5366
ONLY FOR U.S.A.