HP ML150 G6 470065-431 ユーザーズマニュアル

NOTE:

NOTE:

NOTE:

NOTE: Please see the QuickSpecs for additional information:

(Worldwide)

 

NOTE:

NOTE:

NOTE:

NOTE: For additional information on sizing your server, please reference:

NOTE:

NOTE:

NOTE:

NOTE: Please see the UPS and PDU cable matrix's on the HP Power Protection and
Management page. Under Power Cords, click on the "HP Power Cord Matrix" link.
That link will list cable descriptions, requirements, and specifications for UPS and PDU
units. Please see the following link: 

.

 

HP Rack Series

HP Rack Series

HP Rack Series

HP Rack Series

HP 10642 G2 Pallet Universal Rack

AF001A

HP 10642 G2 Shock Universal Rack

AF002A

NOTE:

NOTE:

NOTE:

NOTE: The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks
provide enhanced airflow for maximum cooling, allowing these racks to be fully
loaded with servers using the latest processors.

CAUTION:

CAUTION:

CAUTION:

CAUTION: If a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear
doors, you must allow 830 square inches (5,350 sq cm) of hole evenly
distributed from top to bottom to permit adequate airflow (equivalent to the
required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels
of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION: 

CAUTION: 

CAUTION: 

CAUTION: Always use blanking panels to fill all remaining empty front panel U-
spaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.

 

NOTE: 

NOTE: 

NOTE: 

NOTE: HP ProLiant DL rack models have fixed rails which provide support for racks
with round mounting holes and tool-free support for racks with square mounting holes
(including Compaq/HP 7000, 9000, 10000 and HP series), with an adjustment
range of 26" - 36".
NOTE:

NOTE:

NOTE:

NOTE: Support for all 2 and 4 post Telco racks and threaded hole racks requires an
additional option kit from Rack Solutions. The Rack Solutions brackets can be
purchased at: 

.

 

HP ProLiant ML150 Generation 6 (G6)

HP ProLiant ML150 Generation 6 (G6)

HP ProLiant ML150 Generation 6 (G6)

HP ProLiant ML150 Generation 6 (G6)

DA - 13249   Worldwide — Version 29 — November 14, 2011

Page 25