Panasonic SL-SX331C ユーザーズマニュアル

Thank you for purchasing this product. Before connecting, operating or
adjusting this product, please read these instructions completely. Please
keep this manual for future reference.

PY

P

PC

Before requesting service, make the following checks. If you are in doubt about some of the
check points, or if the remedies indicated in the chart do not solve the problem, see “Product
information”(

➪right) for assistance.

The model number and serial
number of this product can be
found on either the back or the
bottom of the unit.

Please note them in the space
provided below and keep for
future reference.
MODEL NUMBER
SERIAL NUMBER

Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3 www.panasonic.ca

C 2003 Matsushita Electric Industrial Co., Ltd.
Printed in China

F1003TR0

Panasonic Consumer Electronics Company,
Division of Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com
Panasonic Sales Company,
Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985

p

1. Damage requiring service—The unit should be serviced by qualified service

personnel if:

1.

(a)

The AC power supply cord or AC adaptor has been damaged; or

1.

(b)

Objects or liquids have gotten into the unit; or

1.

(c)

The unit has been exposed to rain; or

1.

(d)

The unit does not operate normally or exhibits a marked change in
performance; or

1.

(e)

The unit has been dropped or the cabinet damaged.

2. Servicing—Do not attempt to service the unit beyond that described in these

operating instructions. Refer all other servicing to authorized servicing personnel.

3. Replacement parts—When parts need replacing ensure the servicer uses parts

specified by the manufacturer or parts that have the same characteristics as the original
parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4. Safety check—After repairs or service, ask the servicer to perform safety

checks to confirm that the unit is in proper working condition.

For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-7262, or 
e-mail consumerproducts@panasonic.com, or the website (http://www.panasonic.com).
In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 905-624-5505,
or visit the website (www.panasonic.ca), or an authorized Servicentre closest to you.

This function causes the unit to ignore accidental button presses.
Set to HOLD so the unit doesn’t power on accidentally or play is interrupted. 

This unit can play CD-DA format audio CD-R and CD-RW that have been
finalized

§

upon completion of recording. It may not be able to play some

CD-R or CD-RW due to the condition of the recording.
§Finalizing is a process that enables CD-R/CD-RW players to play audio

CD-R and CD-RW.

The player stores the track where you stopped play.
Opening the lid when the unit is in stop mode cancels the function.

If the unit is left in stop mode for approximately 10 minutes, the unit turns

itself off automatically.

≥The HOLD function is on. Release HOLD (

➪page 3).

≥The disc isn’t correctly set.
≥The disc is scratched or dirty. (Tracks skipped.)
≥There is moisture on the lens. Wait for about an hour

and then try again.

≥The lens is dirty: clean it with a blower

(recommended product: SZZP1038C).If the lens gets
marked with fingerprints, gently wipe them off with a
cotton swab.

≥Ensure the plugs are inserted firmly.
≥Wipe the plugs clean with a clean cloth.
≥The elapsed playing time disappears and sound is

interrupted if bumps continue repeatedly.

≥Separate this unit from mobile telephones.

≥This doesn’t work if you open the lid while the unit is

in stop mode.

≥This doesn’t work during random play. 
≥It may not work correctly under some conditions.

≥Random play modes may be on (

➪page 4).

≥Play resumes from the track where you last stopped

play(play may start from a different track if you
change discs after the power has been turned off).

You may not be able to specify segment A or B at the
end of disc.

Disconnect then reconnect all power sources (batteries
and AC adaptor).

≥The indicator does not appear when an AC adaptor is

connected.

≥The indicator does not appear correctly under some

conditions.

(

)

*

'

The HOLD function is on. Release HOLD (

➪page 3).

≥You haven’t inserted a disc or it isn’t inserted

correctly.

≥You have inserted a disc this unit cannot play.

The disc lid is open.

The program already contains 20 tracks.

RQT7178-p.qxd  03.10.27 4:24 PM  ページ 1