Panasonic sl-sx276j ユーザーズマニュアル
Button
Display/reference
Operation
To pause play
To stop play
To turn off the
unit
Skipping
tracks
Searching
through tracks
Off mode
Stop mode
Sequential Play
Basic Play
Follow steps 1–6.
In step 2, connect the stereo headphones/earphones to the headphone jack [
Ë
]. (Plug in firmly.)
≥
Play stops automatically when all the tracks have been played.
≥
If the unit has been connected to the car audio system, adjust the volume level between 4 and 6 on the unit, then adjust the volume
level on the system.
level on the system.
For your reference:
“
“
” indication
This indication appears for about 30 seconds if [
1;
] is pressed
when no disc is loaded in the unit or if the disc is not properly se-
cured.
cured.
“
*
” indication
This indication appears for about 10 minutes when the cover is
opened. (However, the indication does not appear when the unit
is powered off.)
opened. (However, the indication does not appear when the unit
is powered off.)
Note
!
Never insert foreign objects into the unit body.
Removing discs
1
Press [
∫
,OPR OFF] to stop play and
disc’s rotation.
2
Slide [OPEN] to open the lid.
3
Press [PUSH] to release the disc.
Do not stop the disc by hand or try to remove it before it stops ro-
tating. This can damage CDs.
tating. This can damage CDs.
≥
During program play (page 4), these buttons are
used to skip forward or back through the pro-
grammed sequence of tracks.
used to skip forward or back through the pro-
grammed sequence of tracks.
≥
During random play (page 4), the skip buttons
cannot be used to skip back to tracks that were
played previously in the random sequence.
cannot be used to skip back to tracks that were
played previously in the random sequence.
≥
During program play, random play or 1-track re-
peat play (page 4), search operation is limited to
the current track only.
peat play (page 4), search operation is limited to
the current track only.
Press during play.
Press during play.
Press during stop mode.
Press during play.
Press again to restart play.
Press and hold during play.
Auto power off function
If the unit is left in stop or paused status for approximately
10 minutes, the unit powers itself off automatically in order
to prevent the battery from running down.
(If no disc is loaded in the unit, it powers itself off in about 30
seconds.)
10 minutes, the unit powers itself off automatically in order
to prevent the battery from running down.
(If no disc is loaded in the unit, it powers itself off in about 30
seconds.)
PU
SH
PUSH
3
4
1
6
5
2
L
R
NOR
RESUME
HOLD
RANDOM
VOLUME
5
4
6
1;
A.SHOCK
S-XBS
OPEN
:
5
6
9
∫
OPR
OFF
Label must face upward.
Track number in play
Elapsed playing time of each track
3
1;
∫
OPR
OFF
∫
OPR
OFF
:
5
6
9
(Backward)
(Forward)
A.SHOCK
S-XBS
A.SHOCK
S-XBS
Total number of tracks
Total playing time
HOLD Function
This function causes the unit to ignore short, accidental
button presses. (The disc lid can still be opened and
closed.)
button presses. (The disc lid can still be opened and
closed.)
The HOLD function prevents the following:
≥
Powering on the unit accidentally (which can cause
the batteries to run down).
the batteries to run down).
≥
Play being cut off unexpectedly in the middle of a se-
lection.
lection.
To use the HOLD function
Set [HOLD] to the HOLD position.
The unit and wired remote control have HOLD func-
tions, each of which works independently.
(The HOLD indicator turns green when the remote con-
trol is in HOLD position.)
tions, each of which works independently.
(The HOLD indicator turns green when the remote con-
trol is in HOLD position.)
“
(
” indication
When the unit is in HOLD status, pressing any button
causes the indication “
causes the indication “
(
” to appear on the display.
When the unit is powered off
The “
(
” indication appears only when [
1;
] is
pressed.
Before operating the buttons
Be sure to move [HOLD] to release the unit from
the HOLD mode.
Be sure to move [HOLD] to release the unit from
the HOLD mode.
HOLD
HOLD
HOLD mode
Plug type:
3.5 mm (1/8 in.) stereo
3.5 mm (1/8 in.) stereo