Panasonic th-37pv500e ユーザーズマニュアル

25

During PC mode

Press the MENU button.

Move to choose Setup menu.

Access Setup menu.

Move to choose menu option.

Adjust chosen option or access chosen menu.

Press the EXIT button at any time to exit Setup menu.

MENU

EXIT

Access to adjust chosen option.

Displayed during VGA(640 × 480 dots), WVGA(852 × 480 dots), XGA(1,024 × 768 dots), 
WXGA(1,366 × 768 dots) input signals.
Select WVGA or WXGA during WVGA or WXGA input signal to avoid noise.

Clock : If a periodic striped pattern (noise) occurs, carry out adjustments to reduce the noise to the 

lowest level.

H-pos : Adjust the horizontal position.

V-pos : Adjust the vertical position.

Clock phase  : Eliminate the fl ickering and distortion.

Carry out this adjustment after adjusting Clock.
Adjust to reduce noise to the most inconspicuous level.

Sync :  H & V - To synchronize by the horizontal and vertical signals from your PC.

  on G - To synchronize by the green signal form your PC (if available).

About settings, see page 14.

If the input signal is not applicable, the characters will turn to red.
For applicable PC signals information see page 44.

Clock

Input resolution

H-pos
V-pos
Clock phase
Sync

H & V

VGA

PC setup

Side panel
Power save
OSD language

Off

Off

Access

Volume correction