Panasonic vb43060 ユーザーズマニュアル

Section 700 - Operation

Chapter 4. Key Telephone Features

DBS-2.3/9.2-700

DBS Manual - Revised April 2000

  4-73

• The Talk Back key flashes red.

4.  Make your announcement.

1.  Press the Talk Back key (*3 must be programmed in an FF key).

The Talk Back key flashes red.

2.  To return to the previous call, press the Talk Back key again.

1. Press 

the 

HOLD key to place the call to be transferred on hold.

2.  Dial the number of the extension to which the call will be transferred.

If the extension is already engaged in a call, your phone issues busy tone.

3.  Press “5” and announce the call to be transferred.

If the transferred call is not accepted by the called extension, press the 
FLASH key to cancel the transfer.

If the transferred call is accepted, and Onhook Transfer is enabled for 
your extension, hang up. If OnHook Transfer is not enabled, press PROG 
and then hang up.

Note: Attendant console phones transfer by pressing the RELEASE key.

1.  Replace the handset.

Your extension rings.

2.  Pick up the handset.

• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B 

3.1 or higher)

• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and 

CPC-B 3.1 or higher)

• FF3 (Extension): Call Waiting/OHVA