DELL 200 ユーザーズマニュアル
98
Appendix
Controls and Lights
Power control
push button
Power light
green light — Blinking green in sleep state; solid green for power-on
state.
state.
amber light — Blinking amber indicates a problem with an installed
device; solid amber indicates an internal power problem (see "Power
Problems" on page 38).
device; solid amber indicates an internal power problem (see "Power
Problems" on page 38).
Hard-drive access light
green
Link integrity light (on integrated
network adapter)
network adapter)
green light — A good connection exists between a 10-Mbps
network and the computer.
network and the computer.
orange light — A good connection exists between a 100-Mbps
network and the computer.
network and the computer.
off (no light) — The computer is not detecting a physical
connection to the network.
connection to the network.
Activity light (on integrated network
adapter)
adapter)
yellow blinking light
Diagnostic lights
four lights on the front panel (See "Diagnostic Lights" on page 45 for
an explanation of the diagnostic light codes.)
an explanation of the diagnostic light codes.)
Standby power light
AUX_PWR on the system board
Activity light (optional Media Card
Reader)
Reader)
green blinking light
Power
DC power supply:
Wattage
275 W
Heat dissipation
939 BTU/hr
NOTE:
Heat dissipation is calculated based upon the power supply
wattage rating.
Voltage (See the safety instructions
in the
in the
Product Information Guide
for important voltage setting
information.)
information.)
manual selection power supplies — 90 to 135 V at 50/60 Hz; 180 to
265 V at 50/60 Hz
265 V at 50/60 Hz
Backup battery
3-V CR2032 lithium coin cell