Gateway convertible notebook cx200 cx2000 m280 m285 s-7200 ta1 ta6 ta7 サービスマニュアル
www.gateway.com
53
Replacing the fingerprint reader
Tools you need to complete this task:
v
Screws removed during this task:
To replace the fingerprint reader:
1
Complete the steps in
2
Remove the bay module by following the steps in
.
3
If the convertible notebook has wireless networking built in, unplug the wireless antennas
by following the steps in
by following the steps in
.
4
Remove the hard drive by following the steps in
5
6
7
Remove the LCD assembly by following the steps in
.
8
Remove the palm rest by following the steps in
9
Turn the palm rest over so the back side is facing up.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
1 black 2.5*8.0 (Optional
bay module security
screw)
bay module security
screw)
1 chrome 2.5*5.0 (Hard
drive)
drive)
2 chrome 2.0*3.0
(Fingerprint reader)
(Fingerprint reader)
2 black 2.5*8.0
(Keyboard)
(Keyboard)
4 or 6 black 2.5*8.0 (LCD
hinge to notebook)
hinge to notebook)
14-16 black 2.5*8.0
(palm rest-bottom)
(palm rest-bottom)
2 chrome 2.0*5.0
(palm rest-hard drive
bay)
(palm rest-hard drive
bay)
3 chrome 2.0-0.4*2.0
(palm rest-modular
drive bay)
(palm rest-modular
drive bay)
1 black 2.5*8.0 (palm
rest-top)
rest-top)