Gateway convertible notebook cx200 cx2000 m280 m285 s-7200 ta1 ta6 ta7 サービスマニュアル
www.gateway.com
67
Replacing the TPM module (select models)
Tools you need to complete this task:
v
Screws removed during this task:
To replace the TPM module:
1
Complete the steps in
2
Remove the bay module by following the instructions in
.
3
If the convertible notebook has wireless networking built in, unplug the wireless antennas
by following the steps in
by following the steps in
.
4
.
Important
If the TPM module is located in the wireless bay, use the procedure found in
to replace the TPM module.
Flat-blade driver
Scribe or non-marring tool
- OR -
Phillips #0 screwdriver
5.0 mm hex nutdriver
1 black 2.5*8.0 (Optional
bay module security
screw)
bay module security
screw)
1 chrome 2.5*5.0 (Hard
drive)
drive)
2-4 black 2.5*5.0 (System
board)
board)
2 black 2.0*2.5 (TPM
module)
module)
2 black 2.5*8.0
(Keyboard)
(Keyboard)
4 or 6 black 2.5*8.0 (LCD
hinge to notebook)
hinge to notebook)
14-16 black 2.5*8.0
(palm rest-bottom)
(palm rest-bottom)
2 chrome 2.0*5.0
(palm rest-hard drive
bay)
(palm rest-hard drive
bay)
3 chrome 2.0-0.4*2.0
(palm rest-modular
drive bay)
(palm rest-modular
drive bay)
1 black 2.5*8.0 (palm
rest-top)
rest-top)