JVC 0206ASR-NF-VM ユーザーズマニュアル
MasterPage: Heading0_Left
36
EN
FEATURES FOR RECORDING
LED Light can be used to
brighten the subject in the dark
place during video recording or
D.S.C. shooting.
brighten the subject in the dark
place during video recording or
D.S.C. shooting.
1
Press LIGHT repeatedly to
change the setting.
OFF: Turns off the light.
ON: The light is on always. (
ON: The light is on always. (
appears.)
AUTO: The light turns on automatically when
dark. (
dark. (
appears.)
2
Press the Recording Start/Stop Button to
start video recording or SNAPSHOT to shoot a
still image.
still image.
NOTES:
●
Be careful not to point the LED Light directly to eyes.
●
If the light does not reach the subject when the
LED Light setting is “ON”, the Night-Alive function
will be activated, and makes it possible to shoot
the subject brighter.
LED Light setting is “ON”, the Night-Alive function
will be activated, and makes it possible to shoot
the subject brighter.
●
There is a difference in the brightness of the
images shot between the center area which is
illuminated by the LED Light and the surrounding
areas (which will be darker).
images shot between the center area which is
illuminated by the LED Light and the surrounding
areas (which will be darker).
●
Since subjects are shot at a reduced shutter
speed when the LED Light setting is “ON”, they
will appear slightly blurred.
speed when the LED Light setting is “ON”, they
will appear slightly blurred.
This feature is useful for recording or playing
back precious or hard-to-see moments at a slow
speed. Sound is recorded and played back in
real time.
back precious or hard-to-see moments at a slow
speed. Sound is recorded and played back in
real time.
1
Set the VIDEO/MEMORY Switch to “VIDEO”.
2
Set the recording mode to “
M
”.
3
Set “SNAP/SLOW” to “SLOW”.
pg. 31, 33) The Live Slow indicator “
”
appears.
4
Press SNAPSHOT (SLOW) during recording
or playback.
● The moving pictures are divided into four
frames. They are recorded or played back for
1.5 seconds, and then normal recording or
playback resumes.
1.5 seconds, and then normal recording or
playback resumes.
● This feature is effective when the recording
mode selection is set to both “
A” or “
M
”.
NOTE:
Available only when the VIDEO/MEMORY Switch is
set to “VIDEO”.
set to “VIDEO”.
This camcorder allows you to choose the type of
image output format for video recording.
image output format for video recording.
1
Set the Power Switch to “REC”.
2
Press 16:9 button repeatedly to choose your
selection.
[4:3]: Records with no change in the screen
ratio. For playback on a TV with a normal screen
ratio. When using this mode on a TV with a
normal screen ratio, refer to your TV’s instruction
manual.
16:9: For playback on TVs with an aspect ratio of
16:9. Naturally expands the image to fit the
screen without distortion. The “16:9” indicator
appears. When using this mode, refer to your
wide-screen TV’s instruction manual. During
playback/recording on 4:3 TVs/LCD monitor/
viewfinder, the image is elongated vertically.
[ ] = Factory-preset
ratio. For playback on a TV with a normal screen
ratio. When using this mode on a TV with a
normal screen ratio, refer to your TV’s instruction
manual.
16:9: For playback on TVs with an aspect ratio of
16:9. Naturally expands the image to fit the
screen without distortion. The “16:9” indicator
appears. When using this mode, refer to your
wide-screen TV’s instruction manual. During
playback/recording on 4:3 TVs/LCD monitor/
viewfinder, the image is elongated vertically.
[ ] = Factory-preset
NOTE:
Available only when the VIDEO/MEMORY Switch is
set to “VIDEO”.
set to “VIDEO”.
LED Light
Live Slow
LED Light
Wide Mode
16 : 9
4 : 3
GR-D390US.book Page 36 Wednesday, June 21, 2006 9:55 AM