JVC 0307-tkh-vt-vt ユーザーズマニュアル

ENGLISH - 8 -

To programme a channel in a TVs programme

number manually:

1. PROGRAMME will be the first selected item as you enter

the INSTALL. menu. Pressing or button select the

programme number where you want to the tuned channel

to be stored. (You may also type the programme number

using the digit buttons.)

2. Press

button to select BAND. Using or

button to select the band in which you want to search a

channel.

3. Press

button to select SEARCH. Press

or button to start searching. (Press button to search

forward.Press button to search backwards.)

If the found channel is not the desired one, press or

button to start searching again.
To stop searching before a channel is found, press the re-

verse direction button. For example, when the TV is search-

ing forward with button, press button to stop searching.
If you know the channel number which you want to find, you

can find the channel directly.
Press

button to select CHANNEL, then press

or button to select the channel number, or enter the

number with the digit buttons.
4. If you want to name the new programme, follow the instruc-

tions under "To change the name of a programme" on

page

5. If the channel reception is poor, fine-tune the channel.

Press

button to select FINE TUNING,then

press or to fine-tune the channel.

6. After the all settings are completed, store the new

channels setting to the programme number which you se-
lected. Press

button to select STORE,

then press or to store it.

If you want to modify the current programme numbers

setting (for example, changing fine tuning, etc.) :

1. Select the programme number you want to modify the

settings while no menu appears.

2. Display the INSTALL. menu.
3. Follow To programme a channel in a TVs program-

me number manually: on page

and change the set-

tings of the current programme number.

If you want to name the new programme, follow the in-

structions under "To change the name of a programme"

on page

Note:
Do not use Programme item in the INSTALL. menu to select

the programme number. If you select the programme number

with Programme item and store the settings, the selected

programme numbers current settings are cancelled.

Program. (Programming) Menu

PROGRAM. (Programming) menu is used to display the

programme names and numbers. You can use this menu to

delete a channel, to insert a channel and to autostore the

programmes.
Select the PROGRAM. menu pressing

but-

ton and open it pressing or button. When you enter the

programme menu, all the programme numbers and names

will be displayed on the screen. The programme number and

name of the tuned channel will be shown by the cyan color.

All the other channel numbers will be white. You can move

the number in cyan using

or or button.

Also, it's possible to use digit buttons to select programme

numbers. As you pass through the programme numbers this

way, to reach the programme number you want, the channels

corresponding to the programme numbers you pass through

will be tuned and the selected programme number will be

shown in cyan.

To change the name of a programme:
Move to the channel you want to rename or use the digits

so that the selected programme number is in cyan color.

Press the RED button. Use or button to select the

position and press

button to select a letter.

Now, press the RED button again to store or BLUE button to

cancel NAME.
To delete a channel from a programme number:
Move to the channel you want to delete or use the digits so

that the selected programme number is in cyan color.

Press the YELLOW button. Now the corresponding channel

will be deleted and all the other channels below this pro-

gramme number will be moved one programme number up.

Now, press the YELLOW button again to delete or BLUE but-

ton to cancel DELETE.
To insert a channel into a programme number:
Move to the channel to be inserted or use the digits so that

the selected programme number is in cyan color.

Press the GREEN button. Now using

or buttons, move to the programme number.

Now, press the GREEN button again to insert or BLUE button

to cancel INSERT.
A.P.S.
If you enter the A.P.S. menu, you can automatically program-

me the received channels in your TVs programmes with

A.P.S. ( Automatic programme system ).
1. After displaying the PROGRAM. menu, press the BLUE

button to enter the A.P.S. menu.

2. Select LANGUAGE with the

button, then

press the or button to select a menu language.

01-ENG&BG-AK37-C1100UK-2856-(AV-28KM3SN).p65

24.02.2007, 18:11