JVC 1203-foh-id-vp ユーザーズマニュアル
Master Page: Left-start
18
EN
VIDEO
PLA
Y
B
A
CK
VIDEO PLAYBACK
1
Open the LCD monitor fully.
● Set the Video Output Mode Switch to “LCD
MONITOR”. (
2
Load a cassette. (
3
Set the Playback Mode Switch to “VIDEO”.
4
Set the Power Switch to “ON” while pressing
down the Lock Button located on the switch.
down the Lock Button located on the switch.
5
To start playback, press 4/9.
6
To stop playback, press 8.
● During Stop mode, press 3 to rewind, or
5 to fast-forward the tape.
Maximum continuous playback time
* Provided
NOTES:
● Clean the video heads using an optional dry
cleaning cassette when:
• No picture during playback.
• Blocks of noise appear during playback.
For details,
• No picture during playback.
• Blocks of noise appear during playback.
For details,
● If Stop mode continues for 5 minutes when power
is supplied from a battery, the player shuts off
automatically. To turn on again, set the Power
Switch to “OFF”, then “ON”.
automatically. To turn on again, set the Power
Switch to “OFF”, then “ON”.
● The playback picture can be viewed in the LCD
monitor or on a connected TV. (
● LCD monitor indications:
• When power is supplied from a battery: the
“
” battery indicator is displayed. (
• When power is supplied from an AC outlet: the
“
” battery indicator does not appear.
● When a cable is connected to the S2, AUDIO (L/
R), VIDEO or headphone connector, sound cannot
be heard from the speaker.
be heard from the speaker.
To control the speaker volume…
Rotate the VOLUME Wheel towards “+” to turn up
the volume, or towards “–” to turn down the
volume.
Rotate the VOLUME Wheel towards “+” to turn up
the volume, or towards “–” to turn down the
volume.
Still Playback
Pauses during video playback.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9 again.
1) Press 4/9 during playback.
2) To resume normal playback, press 4/9 again.
● If still playback continues for more than about
3 minutes, the player’s Stop mode is
automatically engaged.
automatically engaged.
● When 4/9 is pressed, the image may not
pause immediately while the player stabilizes
the still image.
the still image.
Frame-By-Frame Playback
Allows frame-by-frame search during video
playback. This feature is available only with a tape
recorded in DV recording mode.
1) Press 4/9 during playback.
2) Press R for forward and T for reverse.
playback. This feature is available only with a tape
recorded in DV recording mode.
1) Press 4/9 during playback.
2) Press R for forward and T for reverse.
Normal Playback
Battery pack
DV mode
HD/SD mode
BN-V416U*
1 hr. 40 min.
1 hr. 30 min.
BN-V428U
3 hr.
2 hr. 50 min.
Speaker
Play/Pause Button (4/9)
Rewind Button (3)
Playback Mode
Switch
Power Switch
Stop Button (8)
VOLUME Wheel
Fast-Forward Button (5)
BLANK SEARCH
Button
CU-VH1US_05Start-Video.fm Page 18 Monday, December 8, 2003 4:46 PM