JVC bd-x200e ユーザーズマニュアル

䡵 Audio and video signals

同期信号発生器

DV IN/OUT

DV IN/OUT

Y/C IN

LINE IN

LINE OUT

AUDIO OUT

AUDIO IN

DV

DV

VIDEO

AUDIO

IN

IN

OUT

IN

OUT

CH1

CH2

REMOTE

USB

DV IN/OUT

SIGNAL

LAN

GND

DC 19V

4dB

 8dB

INPUT

LEVEL

LINE

Y/C

Note 1: The video signal for input is selected using INPUT SELECT from the INPUT SELECT MENU screen.
Note 2: The audio signals for input are selected using INPUT SELECT from the INPUT SELECT MENU screen.

When either LINE or Y/C is set for INPUT SELECT, the analog audio signals from the AUDIO IN terminals will be selected
for input.
When DV is set for INPUT SELECT, the DV audio signals from the DV IN/OUT terminal will be selected for input.

Note 3: When the DVD recorder is in Stop or Recording mode, the video input signal is output on the E-E screen as a composite

video signal.
In addition, the Setup Menu and other setting screens are also displayed on the monitor connected to this terminal. The
DVD recorder’s operation status and other relevant information are displayed on-screen when DISPLAY from the DISPLAY
MENU screen has been set to ON.

Note 4: The Y/C IN terminal’s specification (i.e., S1 or S2) can be selected using Y/C TERMINAL MODE from the RECORDER

MENU (2/2) screen.

Note 5: The standard input level for audio signals input via the AUDIO IN terminals (i.e., +4 dB or –8 dB) can be selected using the

AUDIO INPUT LEVEL switch on the rear panel.

Input

Input

Analog audio

YC separate

Composite

Note 1

Note 2

Note 4

Note 3

Composite

Analog audio

PHONES

(on front panel) Stereo

Headphones

Monitor or TV

Note 5