JVC bd-x200e ユーザーズマニュアル

Disc tray

䡵 Press the OPERATE button to activate Operate On mode.

● The disc tray will open automatically.

While the disc tray is open, the OPEN/CLOSE indicator
will be lit up.

Ensure that the disc is inserted correctly into the tray’s recess
with the printed side facing upward.
● Carefully place the disc in the tray so as not to hit the front

panel.

● The disc tray will close automatically.

● When a disc is inserted, information about that disc is

displayed on-screen. (

☞ Page 18)

● When either a new DVD-RW or one that has been erased

on another machine is inserted, quick erase starts up.
(

☞ Page 31)

䡵 Stop the DVD recorder.

● The disc tray will open automatically.

While the disc tray is open, the OPEN/CLOSE indicator
will be lit up.

● If the current disc has not been finalized, the message

“NOT FINALIZE” will appear on both the monitor and LCD
display.

Be sure to wait until the disc tray has opened fully before
removing the disc.

● The disc tray will close automatically.

● Do not push the disc tray as it is opening or closing.
● Do not place objects other than discs on the disc tray.
● Do not press down on the disc tray.

OPEN/CLOSE indicator
OPEN/CLOSE button

● If the DVD recorder is in either Recording mode or

Recording Pause mode, the disc tray will not open when
the OPEN/CLOSE button is pressed.

● Pressing this button also has no effect during finalizing,

erasing, and dubbing.