JVC DD-1 ユーザーズマニュアル

 

When you start analog playback of a portable digi-
tal audio player connected to the [LINE IN 1] termi-
nal while the main unit is off or another source is 
selected, the main unit automatically turns on and 
the source changes to the connected portable digi-
tal audio player. This function is called the quick 
portable link function (QP LINK). 

• To deactivate QP LINK, select “QP OFF”.
• You can set QP LINK when the main unit is both 

on and off.

■When “QP ON” is selected 

• If the main unit is off, the main unit automati-

cally turns on. 

• The source from the portable digital audio 

player is automatically selected, “LINE 1” is 
displayed and sound is produced.

NOTE
*1 When “QP ON” is displayed, “:ACT” or “:NO 

ACT” is also displayed to indicate the status of 
QP LINK. (According to the status of the main 
unit, “:ACT” and “:NO ACT” changes automati-
cally.)
- “QP ON :ACT” is displayed when QP LINK 

is activated and available. 

- “QP ON :NO ACT” is displayed when QP 

LINK is activated but unavailable. 

Pressing [QP LINK] once can be used to con-
firm the status of QP LINK.

If the sensitivity for the input audio signal is too 
high, QP LINK may be activated even when the 
portable digital audio player is not played back. 
At this time, you can select the lower sensitivity.

• Each time you hold down [QP LINK], the display 

changes in the display window as follows. 
- “QP: LEVEL1” for normal usage (the initial set-

ting) 

- “QP: LEVEL2” for lower sensitivity 

Activating QP LINK

*1

Using QP LINK

Main unit (front view)

Audio cable 
(not supplied)

Output

Portable digital audio player or 
other audio device

Selecting the sensitivity for QP LINK

Playing back sources from other devices (continued)

For the locations of the remote 
control buttons, refer to page 42.

DD-831[A_Ux]-08.fm  Page 43  Friday, September 8, 2006  2:23 PM