JVC DD-1 ユーザーズマニュアル

The speakers for DD-8 must be assembled to the speaker stands before the speakers can be connected to 
the subwoofer. Follow the diagrams below. 

■ CAUTION
• The left and right speakers for DD-8 are consid-

erably heavy. Care must be taken in carrying and 
handling them. Injury to personnel or damage to 
devices may result if the left/right speaker falls.

Mount the speaker body perpendicular to the 
speaker stand. Use the supplied M4 x 25-mm screws 
(3) to fasten each speaker to its speaker stand.

■ CAUTION
• The center surround speaker for DD-8 can be 

installed on a wall. 

• Be sure to have the speaker installed on the wall 

by qualified personnel. 

• DO NOT install the speaker on the wall by your-

self to avoid unexpected damage from it falling 
off the wall due to incorrect installation or weak-
ness in wall structure. 

• Care must be taken in selecting a location for 

speaker installation on a wall. Injury to personnel 
or damage to devices may result if the installed 
speaker interferes with daily activities. 

Assembling the speaker stands (DD-8)

Speaker body

Speaker stand

Black line

Left/right speaker cable (supplied)

Remove the screw and the terminal cover. After 
connecting the speaker cables, reattach the termi-
nal cover to the speaker body and tighten the screw.

Red

Black

Use the supplied 
M5 x 14-mm screws 
(2) to fasten the 
speaker stand.

DD-831[A_Ux].book  Page 6  Wednesday, August 30, 2006  11:48 AM