JVC 0210TTH-SW-VP ユーザーズマニュアル

  indicates the factory default.

ON
OFF

For turning on/off the lamp selected in 

ALamp ModeB.

ON

: Turns on the lamp.

OFF

: Turns off the lamp.

● The following operating modes of the projector are displayed to the 

right of the OFF button.

STANDBY

: Standby (OFF)

PROJECTION

: Lamp Illuminated (ON)

FAN ENABLE

: FAN Enable (OFF ON)

LAMP ENABLE

: LAMP Enable (OFF ON)

DEVICE ENABLE

: Elemental Device Enable (OFF ON)

COOLING

: Cooling (OFF)

EMERGENCY

: Error Occurred (Cooling not performed)

EMERGENCY COOLING : Error Occurred (Cooling performed)

● When in the standby mode, clicking the ON button each time 

switches the mode in the sequence of STANDBY DEVICE 
ENABLE LAMP ENABLE FAN ENABLE PROJECTION.

● Clicking the OFF button when the power is on switches the projector 

to the cooling mode. The power of the projector cannot be turned on 

during the cooling process (180 seconds).

^

Displays the latest error number.

● For details on the error code and description, please refer to 

● ANoneB is displayed when no error is detected.

Q Both

Lamp1

Lamp2

Auto

For selecting the lamp to turn on during power on.

Both

: Selects both lamps.

Lamp1

: Selects only Lamp 1.

Lamp2

: Selects only Lamp 2.

Auto

: Selects only the lamp with the least lamp time. 

However, 

ALamp1B is selected when both lamps have 

the same lamp time.

● This setting is only available in the ASTANDBYB, ACOOLINGB, 

AEMERGENCYB and AEMERGENCY COOLINGB operating modes.

^

For displaying the information on Lamp 1 and 2.

Status

ON

: Lamp illuminated

OFF

: Lamp off

Failed

: The lamp fails to light up even though the operation of 

illuminating the lamp is performed.

Time

Lamp time (in minutes)