JVC dr-m10s ユーザーズマニュアル
Filename [DR-M10SE_11Subsidiary.fm]
Masterpage:Left+
94
EN
Page 94
February 12, 2004 5:31 pm
SUBSIDIARY SETTINGS (cont.)
RECORDING SET
(The boldface settings in the table below indicate the settings at your purchase.)
8 SAVE AS LIBRARY
OFF
ON
ON
When this function is set to “ON”, the recording information is automatically
stored in the library. For details, refer to “Modify Library Information”
(
stored in the library. For details, refer to “Modify Library Information”
(
8 XP MODE REC AUDIO
DOLBY DIGITAL
LINEAR PCM
LINEAR PCM
You can select the audio format when you record a programme in XP mode.
When this function is set to “LINEAR PCM”, you can obtain a high-quality
audio sound.
When this function is set to “LINEAR PCM”, you can obtain a high-quality
audio sound.
DOLBY DIGITAL
:
To record in Dolby Digital format.
LINEAR PCM
:
To record in Linear PCM format.
8 AUDIO REC
NICAM 1/MAIN
NICAM 2/SUB
MONO
NICAM 2/SUB
MONO
You can select the desired NICAM audio channel to be recorded on a DVD-R/
RW (Video mode) disc.
RW (Video mode) disc.
NICAM 1/MAIN
:
To record the main language of NICAM audio.
NICAM 2/SUB
:
To record the sub language of NICAM audio.
MONO
:
To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8 DIRECT REC
OFF
ON
ON
When this function is set to “ON”, you can easily start recording the
programme that you are watching on your TV. Press and hold 7 and press 4
on the remote control, or press 7 on the unit.
programme that you are watching on your TV. Press and hold 7 and press 4
on the remote control, or press 7 on the unit.
NOTES:
● When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and
connect a fully-wired 21-pin SCART cable between the unit and the TV. (
● If “DIRECT REC” is set to “OFF”, the 7 button functions as described in “Basic
● During Direct Rec, “– –” appears on the front display panel.
● If a programme is recorded with the Direct Rec, the station name will not be registered
in the library. “– – – –” will be displayed for the station name.
● Even if there is no power supply for more than 60 minutes, the unit keeps the setting.
8 INPUT COLOUR SYSTEM
PAL
SECAM
SECAM
You can play back PAL discs, or record PAL and SECAM signals on this unit.
Select the appropriate colour system.
Select the appropriate colour system.
PAL
:
To record PAL signals.
SECAM
: To record SECAM signals.
DR-M10SE_01.book Page 94 Thursday, February 12, 2004 9:08 PM