JVC 0905tnh-fn-fn ユーザーズマニュアル

28

EN

Before recording on a DVD, you can confirm the 
quality of the picture and sound with the recording 
speed you selected.

The TV will display the programme and output the 
sound you are about to record in the quality of the 
picture and sound (determined by the recording 
speed) you selected.

• If you want to change the recording speed (to 

improve the recording quality), press 
[REC SPEED] repeatedly.
The recording speed is changed each time you 
press the button.

• You cannot change the recording speed during 

recording.

• If you press [REC MONITOR] while receiving the 

bilingual broadcast, the sound to be recorded will be  
output.

This is a simple way to set the recording time in 
blocks of 30 minutes. Check that the disc you are 
recording onto has enough space remaining for the 
time you set.

Make sure that the TV input is set on the unit.

(See page 23.)

Make sure that the recording format is set to the 
desired mode. (See page 25.)

Press [DVD REC I] repeatedly until 
the desired recording time (30 
minutes to 8 hours) appears on the 
TV screen.

One-touch timer recording will start.

• To change the recording length during one-

touch timer recording, press [DVD REC I] 
repeatedly until the desired length appears.

• To cancel one-touch timer recording within the 

specified time, press [STOP 

S].

• The remaining recording time will appear on the TV 

screen during one-touch timer recording. Press 
[ON SCREEN] to see it on the TV screen.

• The remaining recording time will be displayed on 

the front panel display during one-touch timer 
recording.

• Unlike timer recording, you can perform the 

following operations during one-touch timer 
recording. 
- Turn off the power.
- Use [DVD REC I] or [STOP 

S].

• You cannot use the pause function during one-touch 

timer recording. 

• The unit will be turned off automatically under the 

following conditions.
- No space remains on the disc.
- If a power failure occurs.

• If DVD one-touch timer recording is completed 

during VCR playback or recording, the DVD will be 
in stop mode and the VCR keeps the current mode.

• When an OTR finishes, the unit automatically turns 

itself off. If there is any timer recording in standby, 
the unit automatically switches to the timer-standby 
mode. Press [TIMER

] to cancel the timer-

standby mode to use the unit continuously.

E9770ED_EN.book  Page 28  Wednesday, August 3, 2005  6:35 PM