JVC 0905tnh-fn-fn ユーザーズマニュアル

60

EN

U / D], then press 

If it has already appeared, proceed to step 3.

U / D], then press [ENTER].

U / D], then press [ENTER].

Set the OSD language.
See page 19 for details.

Set the front panel display brightness.

U / D], then press [ENTER].

You can choose one from “Auto,” “Bright” and 
“Dark.”
If “Auto” is selected, the display gets dark when 
the power is off.

Set the screen saver time delay.

U / D], then press [ENTER].

Your setting is activated.

Choose the appropriate Audio settings for your audio 
equipment.
This will only affect DVDs playback.

U / D], then press 

If it has already appeared, proceed to step 3.

U / D], then press [ENTER].

U / D], then press [ENTER].

• The Dynamic Range Control function is available 

only on discs recorded in the Dolby Digital format.

Set the digital audio output.

U / D], then press [ENTER].

Proceed with either of the following steps.

U / D], then press [ENTER].

Your setting is activated.

48kHz: If your amplifier / decoder is NOT compatible 

with 96 kHz PCM, select “48kHz.” Sound 
recorded at 96 kHz is down sampled to 48 
kHz.

96kHz: If your amplifier / decoder is compatible with 

96 kHz PCM, select “96kHz.” Sound is 
sampled at 96 kHz.

E9770ED_EN.book  Page 60  Wednesday, August 3, 2005  6:35 PM