JVC everio gz-mg467 ユーザーズマニュアル

•

 Displays the remaining battery power.

–

•

 As the battery power comes close to nil, the battery 

indicator blinks. When the battery power is exhausted, 
power turns off automatically.

–

•

 Appears when the date/time is not set.

•

 The built-in clock’s rechargeable lithium battery is 

discharged, so the previously set date/time is erased.
Connect the camera to an AC outlet using the AC adapter 
for over 24 hours to charge the clock’s lithium battery. Then 
set the date/time.

17
14

•

 Appears for 5 seconds after power is turned on in recording 

mode if the lens cover is closed or when it is dark.

–

•

 Perform clean up to restore the capacity of the recording media.

•

 Turn off the camera. Remove the microSD card and insert it 

again. Turn on the camera after inserting the microSD card. 
If the error message appears again, replace the card with 
one that is certifi ed to operate correctly.

•

 It is also recommended to run check disc regularly on the 

PC, providing that there is no data on the hard disk of the 
camera.

19

65, 66

–

•

 The video management fi le is broken. Recovery is required 

to record or play back video fi les. Select [YES], then touch 
the OK button to recover the video management fi le.

–

•

 The writing speed of recording medium is slow, or the 

recording medium is corrupted. Use a microSD card that is 
guaranteed to operate correctly.

•

 The hard disk was subjected to vibrations or jolts. Be careful 

not to subject the hard disk to vibrations or jolts.

•

 Appears when the recording medium is full and recording 

is not possible. Delete unnecessary fi les, or replace the 
microSD card.

19

–

32

•

 Appears when an incompatible USB device is connected to 

the camera.

•

 Appears when a DVD burner that is switched off is 

connected. If you want to use the DVD burner, switch the 
power on.

–

–

High

Exhausted