JVC FS-G5 ユーザーズマニュアル

ページ / 49
 
14
 
English
 
Changing the Display Brightness
 
—DIMMER
 
You can dim the display window.
 
Setting the Clock
 
Without setting the built-in clock, you cannot use the Daily 
Timer (see page 18).
• To exit from the clock setting, press CLOCK/TIMER as 
required.
• To go back to the previous step, press CANCEL.
 
1
 
Activate the clock setting mode.
 
• If you have already adjusted the clock before, press the 
button repeatedly until the clock setting mode (see 
page 18) is selected.
 
2
 
Adjust the hour.
 
3
 
Adjust the minute.
 
“CLOCK OK” appears and the built-in clock starts 
working.
 
To check the current time during play
If there is a power failure
 
The clock loses the setting and is reset to “AM 12:00.” You 
need to set the clock again.
 
Turning Off the Power 
 
Automatically
 
To turn off the System after playback is over—
Auto Standby
 
When Auto Standby is in use, the A.STANDBY indicator 
lights on the display.
When the disc playback stops, the A.STANDBY indicator 
starts flashing.
If no disc operation is done for about 3 minutes while the 
indicator is flashing, the System turns off (stands by) 
automatically.
• Auto Standby only works after disc playback.
 
To turn off the System after a certain period of 
time—Sleep Timer
 
1
 
Specify the time (in minutes).
 
2
 
Wait until the set time goes off.
To check the time remaining until the shut-off time
 
• If you press the button repeatedly, you can change the shut-
off time.
 
DIMMER-1
 
Dims the display illumination.
 
DIMMER-2
 
Erases the display illumination.
DIMMER
DIMMER-1
DIMMER-2
DIM OFF
(Canceled)
Remote
ONLY
CLOCK
/TIMER
REC
PRESET UP
PRESET DOWN
SET
PRESET UP
PRESET DOWN
SET
DISPLAY
Clock
Source information
Remote
ONLY
A.STANDBY
A.STANDBY
REC
SLEEP
10
20
30
60
90
120
OFF
(Canceled)
SLEEP
SLEEP
REC
FS-G5[C].book Page 14 Wednesday, April 6, 2005 1:58 PM