JVC GR-D771U ユーザーズマニュアル
ADDITIONAL FEATURES FOR D.S.C.
28
EN
MasterPage: Left
To Print By Selecting Still Images And
Number Of Prints
Number Of Prints
1
Perform steps
1 – 3 in “To Print All Still
Images (One Print For Each)” (
pg. 27).
2
Select “CURRENT”,
press SET or
2
. The
DPOF screen appears.
3
Press
1
or
2
to select
the desired file.
4
Press
4
or
3
to select the number
indication (00), and press SET.
5
Select the number of prints
by pressing
3
to increase the
number, or
4
to decrease the
number, and press SET.
● Repeat steps
3
through
5
for the desired number
of prints.
● The number of prints
can be set up to 15.
● To correct the number of
prints, select the image
again and change the number.
again and change the number.
6
Select “RETURN”,
press SET. The “SAVE?”
appears.
appears.
● If you did not change any
settings in step
3
through
5
, the DPOF
Menu reappears.
7
Select “EXECUTE”, press SET.
● To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps
1 – 3 in “To Print All Still
Images (One Print For Each)” (
pg. 27).
2
Select “RESET”, press SET or
2
. The
DPOF screen appears.
3
Select “EXECUTE”, press SET.
● To cancel selection, select “RETURN”.
● The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
power, as this may cause the memory card to be
corrupted.
NOTE:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with “DIS”
de-activated (
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with “DIS”
de-activated (
pg. 30) this can be avoided.
You can initialize a memory card any time.
After initializing, all files and data stored in the
memory card, including those which have
been protected, are cleared.
After initializing, all files and data stored in the
memory card, including those which have
been protected, are cleared.
1
Perform steps
1 – 3 in “Normal Playback
Of Images” (
pg. 25).
2
Press MENU.
3
Select “FORMAT”, press SET
or
2
. The FORMAT screen
appears.
● Press 1 whenever you want to
return to the previous menu
screen.
screen.
4
Select “EXECUTE”,
press SET. The memory
card is initialized.
card is initialized.
● When initialization is
finished, “NO IMAGES
STORED” appears.
STORED” appears.
● To cancel initialization, select “CANCEL”.
DPOF
SHEETS
RETURN
02
Select
1
Select
2
SET
DPOF
SHEETS
02
DPOF
CANCEL
SAVE?
EXECUTE
Initializing A Memory Card
1
Select
2
SET
CANCEL
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
GR-D771US_EN.book Page 28 Friday, December 15, 2006 9:08 AM