JVC GVT0102-002A ユーザーズマニュアル

You can play back type I tapes.

0 on the unit.

0 again to close the

2 3.

The unit automatically turns on and the
tape starts playing. The tape direction
indicator (

3 or 2) flashes slowly on the

display.
• Each time you press the button, the tape direction

changes:
3 : plays the front side.

2 : plays the reverse side.

When the tape plays to the end, the deck automatically
stops if the Reverse Mode is set to 

 or 

. (See

“To play both sides—Reverse Mode.”)

2 3

“NO TAPE” appears on the display.

To stop playing, press 

7.

To fast-wind to the left or to the
right, press 

¢ or 4 while the

tape is not running.
The tape direction indicator (

3 or 2)

starts flashing rapidly on the display.

To remove the cassette, press PUSH OPEN 

0 on the unit.

• If the tape is playing, stop it first.

You can set the deck to play just one side of a tape, both sides
once, or both sides continuously.

Press REV.MODE (reverse mode).
• Each time you press the button, the Reverse

Mode changes as follows:

 : The deck automatically stops after playing both

sides of the tape. Stops when playback in the 

2

direction is finished.

 : The deck continues to play both sides of the tape

until 

7 is pressed.

 : The deck automatically stops after playing one

side of the tape.

• DO NOT open the cassette holder when the tape

is running.

• The use of C-120 or thinner tape is not

recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.

REV.

MODE

PUSH OPEN

EN14-17_FS-J60&50[C]f.pm6

03.1.23, 7:43 PM

17