kymco mo p250 サービスマニュアル
5. ENGINE REMOVAL/INSTALLATION
5-1
PEOPLE 250
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• A floor jack or other adjustable support is required to support and maneuver the engine. Be
careful not to damage the motorcycle body, cables and wires during engine removal.
• Use shop towels to protect the motorcycle body during engine removal.
• Drain the coolant before removing the engine.
• After the engine is installed, fill the cooling system with coolant and be sure to bleed air from the
• Drain the coolant before removing the engine.
• After the engine is installed, fill the cooling system with coolant and be sure to bleed air from the
water jacket. Start the engine to check for coolant leaks.
• Before removing the engine, the rear brake caliper must be removed first. Be careful not to bend
or twist the brake fluid tube.
SPECIFICATIONS
Engine oil capacity: at disassembly: 1.1 liter
Engine oil capacity: at disassembly: 1.1 liter
TORQUE VALUES
Rear shock absorber upper mount bolt
Rear shock absorber upper mount bolt
35_
45N-m
Rear shock absorber lower mount bolt
35_
45N-m
Rear axle nut
110_
130N-m
Engine hanger bolt (frame side)
45_
55N-m
Engine hanger bolt (ENG. side)
45_
55N-m
Rear caliper holder bolt
29_
35N-m
Exhaust muffler pipe nut
18_
22N-m
Exhaust muffler bolt
32_
38N-m
Rear fork bolt
29_
35N-m