JVC hv10

Recording 

 When using a tripod: Do not 

leave the viewfinder exposed to 
direct sunlight as it may melt 
(due to concentration of the light 
by the lens). Do not use tripods 
with fastening screws longer 
than 5.5 mm (0.2 inch). Doing 
so may damage the camcorder.

Recording Still Images

/

• Once the focus is automatically 
adjusted, 

 will turn green and one or 

more AF frames appear.
• When you press 

 on the 

wireless controller, the still image is 
recorded immediately.

The CARD access indicator will flash 
as the image is being recorded.

IMPORTANT

Avoid the following actions while the card 
access display (

) appears on screen and 

when the CARD access indicator is on or 
flashing. Failing to do so may result in 
permanent data loss.
- Do not open the memory card slot cover and 
do not remove the memory card.
- Do not disconnect the power source or turn off 
the camcorder.
- Do not change the position of the 

/

switch or the operating mode.

NOTES

 If the subject is not suitable for autofocus, 

 

turns yellow. Adjust the focus manually (

44).

 When the subject is too bright, “OVEREXP.” 

starts flashing. In such case, use the optional 
FS-H37U ND filter.

Zooming

POINTS TO CHECK

: In addition to the 10x optical 

zoom, the 200x digital zoom is also 
available (

31).

Before using a memory card for the first 
time, be sure to initialize it with this 
camcorder (

56).

(

10)

PHOTO

PHOTO

PHOTO

(

10)

Zoom out

Zoom in