JVC hv10

 Connecting to a TV or VCR

NOTES

 We recommend powering the camcorder 

using the compact power adapter.

 When recording to a VCR using an analog 

connection –connection type 

 (

57)–, the 

quality of the edited tape will be lower than the 
original.

 When recording to a digital video recorder 

using the HDV/DV terminal –connection type 

 

(

57)–:

- If the picture does not appear, disconnect the 
DV cable and restore the connection after a 
short while or turn the camcorder off and then 
on again.
- Proper operation cannot be guaranteed for all 
digital devices equipped with a DV terminal. If 
the operation does not work, use the AV IN/
OUT terminal.

Analog Line-In Recording

You can input video from an analog video 
source (VCR, TV, etc.) and record the 
input video on the tape in the camcorder 
in DV standard. Analog video cannot be 
converted to HDV standard.

Connecting

Connect the camcorder to the video input 
source using an analog connection –
connection type 

(

57)– shown in the 

previous section Connection Diagrams.

Recording

In record pause mode and while 
recording you can check the picture on 
the camcorder’s screen.

Recording starts. 

In record pause, press 

 again to 

resume recording.

IMPORTANT

Depending on the analog signal sent from the 
connected device the input image may be 
distorted or not be displayed at all (for example, 
video input that includes copyright protection 
signals or anomalous signals such as ghost 
signals).

NOTES

We recommend powering the camcorder using 
the compact power adapter.

(

10)

REC PAUSE

/

/

/