JVC j54a0721a ユーザーズマニュアル

1

To turn on the TV, press POWER (POWER indicator 

on the front of the unit changes green. It may take 

approx. 10 seconds for a picture to appear on 

screen.). The starting setup function begins. 

Automatic Search

Start

This unit has been preset to STORE brightness
This setting does not qualify under ENERGY
STAR V4.0. To reduce brightness and energy 
consumption, change setting to ‘HOME’. This 
setting does qualify under ENERGY STAR V4.0.

TV Location

Store

Signal Type

Cable

2

Press ▲/▼ to select “TV Location”, then press 

◀/▶ to select “Store” or “Home”. This product 

qualifies for ENERGY STAR 4.0 In Home mode 

default setting.
NOTE:

This unit has been preset to STORE brightness. 

This setting does not qualify under ENERGY 

STAR V4.0. To reduce brightness and energy 

consumption, change setting to ‘HOME’. This 

setting does qualify under ENERGY STAR V4.0.

The device may not conform to the ENERGY 

STAR 4.0 standard after Reset is performed or 

the Backlight is adjusted.

•

•

3

Press ▲ or ▼ to select “Signal Type”, then press 

◀ or ▶ to select “Cable” or “Air”.

4

Press ▲ or ▼ to select “Automatic Search”, then 

press ▶ or ENTER. 

5

Now the “Auto Setup” starts. After the starting 

setup is completed, the TV channel appears on 

the screen.
• 

Depending on the reception condition, it may 

take from 15 minutes to 30 minutes to complete 

memorizing digital cable channels. Please be patient.

If you press ENTER in the process of “Auto Setup”, 

the Starting Setup stops and changes to the normal 

screen.
When you make a menu selection, your changes 

occur immediately. You do not have to press EXIT/

CANCEL to see your changes.

TV operation
1

To turn on the TV, press POWER.

(POWER indicator on the front of the unit 

changes green. It may take approx. 10 seconds 

for a picture to appear on screen.)

2

Adjust the volume level by pressing VOL + or – . 

The volume level will be indicated on the screen 

by blue bars. As the volume level increases, so do 

the number of bars. If the volume decreases, the 

number of blue bars also decreases.

3

Set the Signal Type option to the appropriate 

position (see “Air/Cable selection” on page 21).

•

•

4

Press the Direct Channel Selection (0-9, –) 

buttons to select the channel.

(If you press only channel number, channel 

selection will be delayed for a few seconds.)
TO SELECT ANALOG CHANNELS

1-9: 

Press 1-9 as needed. Example, to 

select channel 2, press 2, then press 

ENTER.

10-99: 

Press the 2 digits in order. Example, 

to select channel 12, press 1, 2, then 

press ENTER.

100-135:  Press the 3 digits in order. Example, to 

select channel 120, press 1, 2, 0, then 

press ENTER.

Press the first 1-3 digits, then press the – button, 

followed by the remaining number.

Example, to select channel 15-1, press 1, 5, –, 1, 

then press ENTER.

If a channel is selected with only audio content, 

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital signal, 

“Digital channel signal strength is low” will be 

displayed on the screen.

The same program may be available on either an 

analog channel or a digital channel. You may choose 

to watch either format.

If a channel is selected to which you have not 

subscribed, “Digital channel is encrypted” will be 

displayed on the screen.

•

•

•

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) 

(W)

37-59 (AA) 

(WW)

60-85 (AAA) 

(ZZZ)

86-94 (86) 

(94)

95-99 (A-5) 

(A-1)

100-135 (100) 

(135)

01 (4A)

If a channel with no broadcast is selected, the 

sound will automatically be muted.

It may take a few seconds for a digital channel 

picture to appear on screen after being selected.

To view a signal from another device connected to 

your LCD TV, such as a VCR player, press INPUT 

SELECT, then press ▲/▼ or corresponding Number 

buttons (0-7), then press ENTER. You can select 

TV, Video1, Video2, Component, HDMI1, HDMI2, PC 

or DVD depending on which input jacks you used to 

connect your devices.

Press and release CH  / . The channel automatically 

stops at the next channel set into memory.

For proper operation, before selecting channels, they 

should be set into the memory. See “Memorizing 

channels” on page 21.

•

•

54A0721A.indb   18

54A0721A.indb   18

10.4.20   5:32:48 PM

10.4.20   5:32:48 PM