JVC j54a0721a ユーザーズマニュアル

Playback procedure
1

Press TV/DVD to select DVD mode.

2

Place the disc in the 

disc slot with the label 

side facing forward. (If 

the disc has a label.) 

Hold the disc without 

touching either of its 

surfaces, align it with 

the guides, and place it 

in position.

3

On the screen, “ ” changes to “Loading” and then 

playback will commence.

A menu screen may appear on the TV screen, 

if the disc has a menu feature. In this case, 

press ▲, ▼, ◀, ▶ or ENTER to operate a menu 

feature.

•

4

Press STOP to end playback.

The unit can record where you stop a video, but 

it depends on a disc you are using. Press PLAY 

to resume a playback point. The unit can store 

a memory of stopped point of last five discs that 

you have played. When one of these discs is next 

loaded, you can resume playback from where you 

stopped playing last time.

If you press STOP again (“Resume off” appears 

on the screen) the unit will clear the stopped point.

You cannot save a stopped point for some discs. 

If a number of discs played and stored in the unit 

exceeds five, a new memory will overwrite the old 

stored memory.

•

•

•

5

Press  

(EJECT).

Remove the disc and then press POWER.

The unit turns off.

When you eject the disc, you may hear 

mechanism noise, but it is not malfunction.

•

If a non-compatible disc is loaded, “Can’t play disc” 

or “Incompatible disc region number Can’t play 

disc” will appear on the TV screen according to the 

type of loaded disc. In this case, check your disc 

again (see pages 10 and 33).

Some discs may take a minute or so to start 

playback.

If an 8 cm disc is placed into the disc slot and 

picture playback or menu display does not begin 

automatically, press PLAY.

A prohibition message “Depending on the disc, this 

operation may be prohibited” or “This operation 

can’t be performed” may appear at the screen. This 

message means either the feature you tried is not 

available on the disc, or the unit cannot access 

the feature at this time. This does not indicate a 

problem with the unit.

When you set a single-faced disc label downwards 

(i.e. the wrong way up) “Loading” will appear on the 

display and then “Can’t play disc” will be displayed.

Some playback operations of DVDs may be 

intentionally fixed by software producers. Since 

this unit plays DVDs according to the disc content 

recorded, some playback features may not be 

available. Also refer to the instructions supplied with 

the DVDs.

•

•

•

•

•

•

Before DVD/CD operation, please make the following 

preparations.

1

Insert the AC cord plug into a standard 120V 

60Hz polarized AC outlet. 

If the AC cord plug is plugged in for the first 

time, wait for about 5 seconds before pressing 

POWER.

When connecting to other equipment, unplug 

the unit from the AC outlet.

•

•

2

Press POWER on the unit or on the remote 

control to turn on the unit. The POWER indicator 

will change to green.

Each time you turn the unit ON, the TV/DVD 

starts from the TV mode.

When using an amplifier, switch on the amplifier. 

•

•

3

Press TV/DVD to select DVD mode.

The DVD startup screen will appear on the screen.

Static electricity, etc., may affect the player’s 

operation. Disconnect the AC power cord once, 

then connect it again.

If the unit is slanted or moved while inserting disc, 

the disc may get damage.

Press DISPLAY. The status display of the disc will 

appear on the screen

Display messages may change at every time when 

you press DISPLAY for some discs or files.

To make the status display screen disappear, press 

DISPLAY again.

•

54A0721A.indb   26

54A0721A.indb   26

10.4.20   5:32:53 PM

10.4.20   5:32:53 PM