JVC LT-32WX50 ユーザーズマニュアル

Troubleshooting

The following are not malfunctions.

●

This LCD display is built with very high precision technology; however,

be aware that a few pixels may be missing or constantly lit.

●

When a still image is displayed for a long time, it may remain

indistinctly on the screen after the picture has changed. The remaining
picture will disappear after a while.

●

The following symptoms are problems only when pictures or sounds

are not played back normally.

●

A slight electric shock occurs when you touch the monitor.

●

The top and/or rear panel of the monitor becomes hot.

●

The monitor emits a cracking noise.

●

The monitor emits a mechanical noise.

●

If the monitor does not operate normally, perform the following to

reset the monitor.

●

Unplug the monitor from the wall outlet, and plug it in again.

Cannot turn on the monitor.

●

Connect the power cord properly. (➔ page 08)

The remote control does not work.

●

Insert the batteries in the correct direction. (➔ page 04)

●

Replace the batteries with new ones.

●

Aim the remote control to the remote sensor on the monitor.

(➔ page 09)

●

The effective range of the remote control is about 7 meters (23 feet).

●

Get closer to the monitor.

●

Remove any obstruction between the remote control and the monitor.

No picture from a connected device.

●

Select the correct input on the monitor.

●

Connect the external device properly.

●

Turn on the external device and start playback.

The monitor turns off automatically.

●

When you want to display a picture on the monitor for a long time,

select “ Off ” for “ Auto Shut Off ” (➔ page 27) in “ Setup ”.

LT32WX50__us_en.indb 44

09.10.19 11:27:42 AM