JVC 2a73501a ユーザーズマニュアル

Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then

press VCR to select the VCR mode. (The VCR indicator will light)

Load a blank cassette tape with the
erase prevention tab intact. (The
DVD/VCR will automatically turn
on.)

Select the program (e.g.29) you want to record with PR +/– or
number keys.

1~9 : e.g. 5 = press “5”
10~80 : e.g. 29 = press “2” and “9”.

If a recording in Long Play mode is intended, press

(TAPE

SPEED) to display "LP". (see note on page 28)

Press 2 on the VCR or while holding 2, press

the Remote to begin recording. Press 2 on the VCR again to
stop recording after 30 minutes. Each additional press of 2 will
increase recording time as shown in the chart below, up to a
maximum of 5 hours. The ITR and
recording time will appear on the
screen for about 4 seconds. And,
REC will keep blinking in the display.

Instant Timer Recording (ITR)

Note:
• If you wish to watch the DVD playback

during the ITR, press DVD to change to
DVD mode and perform the DVD play-
back (see page 42).

• If the tape supply has not sufficed for

ITR recording, the clock symbol (

) will

blink at the tape-end and then VCR
mode will change to DVD mode.
In this case, press • to cancel the
blink or press EJECT to remove the cas-
sette tape.

The instant timer recording feature
provides a simple and convenient way
to make a timed recording.

To Extend the Recording Time

While holding 2, press

repeatedly until the desired time
appears on the display.

To stop the ITR

Press 3.

ITR 1 : 30

CH 29

SWF

“REC” will keep blinking

in the display.

VCR

VCR

Tape speed: SP

Tape speed: LP

CH 29

ITR 0:30

INDEX

SWF

STEREO

REC

VCR

Recording

0:30

1:00

1:30

10:00

2:00

3:00

4:00

5:00

.......