JVC lct2443-001a-a ユーザーズマニュアル
9
Attach the stand to the TV
Precautions
When attaching the TV to the wall
To prevent scratches on the panel, lay a piece of soft cloth on an even platform and place the TV
onto it.
onto it.
1)
2)
Seal up the two holes at the bottom of the
TV using the plates provided. Peel off the
protection fi lm on the plates. Then, peel the
plates from the paper and stick them on the
holes.
TV using the plates provided. Peel off the
protection fi lm on the plates. Then, peel the
plates from the paper and stick them on the
holes.
Notes:
• To reinstall the stand, reverse the procedure from 2) to 1).
• If you fi nd it diffi cult to remove the screws from inset screw wells, use a magnetized
• To reinstall the stand, reverse the procedure from 2) to 1).
• If you fi nd it diffi cult to remove the screws from inset screw wells, use a magnetized
screwdriver.
Tidying the cables
A cable holder which keeps your connection cables
tidy is attached to the back of the stand.
tidy is attached to the back of the stand.
Install your TV
To prevent the TV from falling, thread the belt
through the hole on the back of the standand
secure it to the TV rack.
through the hole on the back of the standand
secure it to the TV rack.
Belt and screw (not included)
Hole
LCT2443-001A-A English.indd 9
LCT2443-001A-A English.indd 9
6/3/08 3:24:47 PM
6/3/08 3:24:47 PM