JVC KW-AVX830 ユーザーズマニュアル

35

ENGLISH

Initial: Underlined

Fader : Adjust the front and rear speaker output balance.

♦

 F6 to R6; Initial 0

•  When using a two-speaker system, set the fader to the center (0).
Balance : Adjust the left and right speaker output balance.

♦

 L6 to R6; Initial 0

Press [ 

5

/

∞

/

2

/

3

 ] or drag [ 

 ] to adjust.

•  To clear the adjustment, press [Reset].

Volume Adjust *

6

Adjust and store the auto-adjustment volume level for each source, comparing 
to the FM volume level. The volume level will automatically increase or decrease 
when you change the source.
• <Fix> appears if an FM broadcast is selected as the source.

♦

 –12 to +12; Initial 00

Adjust the subwoofer output level.

♦

 00 to 08; Initial 08

♦

♦

:  Select when the subwoofer is not connected.
:  Select when the subwoofer is connected.

Select the crossover frequency between the front/rear speakers and the subwoofer.

♦

You can change the maximum volume level of this unit.

♦

♦

♦

:  Deactivates the built-in amplifier.
:  VOL 00 to 30 (Select this if the maximum power of the 

speakers is less than 50 W.)

:  VOL 00 to 50

•  If you change the setting from <High> to <Low> while the volume level is set 

higher than “VOL 30,” the unit automatically changes the volume level to “VOL 
30.”

You can activate/deactivate the loudness function.

♦

♦

:  Cancels.
:  Boost low and high frequencies to produce a well-balanced 

sound at a low volume level.

Rear Speaker *

7

You can activate/deactivate the rear speakers.
•  This setting takes effect only when Dual Zone is activated. ( 

 28)

♦

♦

:  Deactivate the rear speakers.
:  Activate the rear speakers.

*

6 

For “DISC/USB”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG 
Audio and the others.

*

7 

EN_KW-AVX838[J]001B.indb   35

EN_KW-AVX838[J]001B.indb   35

10.5.6   2:21:28 PM

10.5.6   2:21:28 PM