JVC LVT1340-001A ユーザーズマニュアル
36
ENGLISH
About sounds reproduced through the terminals
• Through the analog terminals (AV-OUT/cordless headphones): 2-channel signal is emitted.
When playing a multi-channel encoded disc, multi-channel signals are downmixed.
(AUDIO—DOWN MIX: see page 30.)
When playing a multi-channel encoded disc, multi-channel signals are downmixed.
(AUDIO—DOWN MIX: see page 30.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this
Digital signals (Linear PCM, Dolby Digital, DTS, MPEG Audio) are emitted through this
terminal. (For more details, see table below.)
To reproduce multi-channel sounds such as Dolby Digital, DTS, and MPEG Audio, connect
an amplifier or a decoder compatible with these multi-channel sources to this terminal, and set
“DIGITAL AUDIO OUTPUT” correctly. (See page 30.)
“DIGITAL AUDIO OUTPUT” correctly. (See page 30.)
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup
menu (see page 30).
menu (see page 30).
DIGITAL AUDIO OUTPUT
Output Signals
Playback Disc
STREAM/PCM
DOLBY DIGITAL/PCM
PCM ONLY
DVD
48 kHz, 16/20/24 bits Linear PCM
48 kHz, 16 bits stereo Linear PCM
96 kHz, Linear PCM
with DTS
DTS bitstream
48 kHz, 16 bits stereo Linear PCM
with Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bits
stereo Linear PCM
with MPEG Audio
MPEG bitstream
48 kHz, 16 bits Linear PCM
Audio CD, Video CD
44.1 kHz, 16 bits stereo Linear PCM
Audio CD with DTS
DTS bitstream
44.1 kHz, 16 bits stereo Linear PCM
MP3/WMA
32/44.1/48 kHz, 16 bits Linear PCM
EN31-39_KV-MRD900[J]f.indd 36
EN31-39_KV-MRD900[J]f.indd 36
05.3.19 11:45:05 AM
05.3.19 11:45:05 AM