JVC lt-26b60bu ユーザーズマニュアル

ページ / 32
ENGLISH   - 14 -
3
Programme Selection (Previous or next
programme)
•  Press  “
”  button  to  select  the  previous
programme.
•  Press  “
”  button  to  select  the  next
programme.
Programme Selection (direct access):
Press digit buttons on the remote control hand-
set to select programmes between 0 and 9.
TV will switch to the selected programme. To
select  programmes  between  10  -  99,  press
the  digit  buttons  consecutively  which
programme  you  want  to  select  (eg.  for
programme 27, first press 2 and then 7). When
it is late to press second digit button only the
first  digit  programme  will  be  displayed.  The
limit of the delay time is 3 seconds.
Example: PR6   press 6,
 PR12   press 1and 2
Press  directly  the  programme  number  to
reselect  single  digit  programmes.
Hint: The channel list numbers are assigned by the broad-
casters. Because not all channels are broadcast free-to-air
and stored by the receiver, the channel list numbers do not
run continuously. The fifteenth channel in the list, for ex-
ample, may not be channel number 15 but channel number
17.
Menu System
Your TV has been designed with a menu sys-
tem to provide an easy manipulation of a multi-
function system. The TV is controlled by choos-
ing  the  commands,  which  are  displayed  on
the screen.
MAIN MENU
Press the “MENU” button. The main menu will
be displayed in the middle of the screen.
To select a sub-menu use  “ ” or “ ” but-
ton, and press “ ” or “ ” button or directly
press “OK” button.
In  EXT-1,  EXT-2, 
EXT-3  and  EXT-4 
modes,
main menu appears the same as in TV mode
but without Program sub-menu.
Menu does not  disappear automatically if it is
left on the screen.
• Press the “MENU” button again to remove
menu.
• Press the “BACK” button to return to the pre-
vious menu.
Picture Menu
Press “MENU” button, now you are in main
menu. In the Main menu, select “Picture” us-
ing “ ” or “ ” button, then enter  the Picture
menu by pressing  “ ” / “ ” or “OK” button.
Setting Mode
• As you enter the picture menu, Mode will be
the first item.
•  By  pressing  “ ”  or  “ ”  button  you  may
choose one of these options:
   Soft, Standard and Bright.