JVC lt-32d50sj ユーザーズマニュアル

ページ / 72
Setting up your TV
13
LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH
When the T-V LINK menu is 
changed over to another menu:
The TV has finished its menu. This new 
menu is operated from the VCR. See the 
VCR instruction manual for what to do 
next.
If “FEATURE NOT AVAILABLE” 
appears at the T-V LINK menu:
Check the following three items. Then 
press the 2 button to retry data 
transmission.
• Has a T-V LINK compatible VCR 
been connected to the EXT-2 
terminal?
• Has the VCR power been turned on?
• Does the SCART cable that is 
connected to the EXT-2 terminal to T-
V LINK compatible VCR have all its 
proper connections?
T-V LINK functions
When you have a T-V LINK compatible 
VCR connected to the EXT-2 Terminal on 
the TV, it is easier to set up the VCR and to 
view videos. T-V LINK uses the following 
features:
To use T-V LINK functions:
A “T-V LINK compatible VCR” means a 
JVC video cassette recorder with the T-V 
LINK logo, or with one of the following 
logos. However, these VCRs may support 
some or all of the features described earlier. 
For details, see your VCR instruction 
manual.
“Q-LINK” (a trademark of Panasonic 
Corporation)
“Data Logic” (a trademark of Metz 
Corporation)
“Easy Link” (a trademark of Phillips 
Corporation)
“Megalogic” (a trademark of Grundig 
Corporation)
“SMARTLINK” (a trademark of Sony 
Corporation).
„
Pre-set download
The VCR will automatically download the 
registered data on the TV Analogue 
terrestrial broadcasting channels from the 
TV. This means you do not need to set up the 
program channels on your VCR manually.
The preset download function automatically 
begins when the initial setting is complete or 
whenever you carry out the AUTO 
PROGRAM or EDIT/MANUAL functions.
You can also carry out this function using 
your VCR controls.
When “FEATURE NOT AVAILABLE” is 
displayed:
If “FEATURE NOT AVAILABLE” is 
displayed, the download was not performed 
correctly. Before trying to download again, 
check that:
• the VCR power is turned on
• the VCR is T-V LINK compatible
• the VCR is connected to the EXT-2 
terminal
• the SCART cable is fully wired.
„
Direct Rec
“What You See Is What You Record”
You can easily record to VCR the images 
that you are watching on the TV.
For details, read the manual for your VCR.
Use your VCR controls. “DEVICE IS 
RECORDING” is displayed.
You cannot carry out Direct Rec using your 
TV’s control.
Generally, the VCR cannot record a TV 
channel that it cannot receive properly on its 
own tuner, even if you can view that TV 
channel on the TV. However, some VCRs 
can record a TV channel by using the TV’s 
output if that channel can be viewed on the 
TV. For details, see your VCR instruction 
manual.
LT-32&26D50BJSJ_Eng.book  Page 13  Thursday, October 7, 2004  4:42 PM